Bedienungsanleitung Carina Power Stretch 8360 (Seite 28 von 29) (Englisch)

614533

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Trouble shooting guide

Problem Cause Correction

Upper thread

breaks

Lower thread

breaks

Skipped stitches

Needle breaks

Loose stitches

Seams gather or

pucker

Uneven stitches,

uneven feed

The machine is

noisy

The machine

jams

1.The machine is not threaded correctly.

2.The thread tension is too tight.

3.The thread is too thick for the needle.

4.The needle is not inserted correctly.

5.The thread is round wound the spool

holder pin.

6.The needle is damaged.

1.The bobbin case is not inserted

correctly.

2.The bobbin case is threaded wrongly.

3.The lower thread tension is too tight.

1.The needle is not inserted correctly.

2.The needle is damaged.

3.The wrong size needle has been used.

4.The foot is not attached correctly.

1.The needle is damaged.

2.The needle is not correctly inserted.

3.Wrong needle size for the fabric.

4.The wrong foot is attached.

1.The machine is not correctly threaded.

2.The bobbin case is not correctly

threaded.

3.Needle/fabric/thread combination is

wrong.

4.Thread tension wrong.

1.The needle is too thick for the fabric.

2.The stitch length is wrongly adjusted.

3.The thread tension is too tight.

1.Poor quality thread.

2.The bobbin case is wrongly threaded.

3.Fabric has been pulled.

1.The machine must be lubricated.

2.Fluff or oil have collected on the hook

or needle bar.

3.Poor quality oil has been used.

4.The needle is damaged.

Thread is caught in the hook.

1.Rethread the machine.

2.Reduce the thread tension. (lower number)

3.Select a larger needle.

4.Remove and reinsert the needle. (flat side

towards the back)

5.Remove the reel and wind thread onto reel.

6.Replace the needle.

1.Remove and reinsert the bobbin case and pull

on the thread. The thread should pull easily.

2.Check both bobbin and bobbin case.

3.Loosen lower thread tension as described.

1.Remove and reinsert needle. (flat side towards

the back)

2.Insert a new needle.

3.Choose a needle to suit the thread and fabric.

4.Check and attach correctly.

1.Insert a new needle.

2.Insert the needle correctly. (flat side towards

the back)

3.Choose a needle to suit the thread and fabric.

4.Select the correct foot.

1.Check the threading.

2.Thread the bobbin case as illustrated.

3.The needle size must suit the fabric and

thread.

4.Correct the thread tension.

1.Select a finer needle.

2.Readjust the stitch length.

3.Loosen the thread tension.

1.Select a better quality thread.

2.Remove bobbin case and retread and insert

correctly.

3.Do not pull on the fabric while sewing, let it be

taken up by the machine.

1.Lubricate as described.

2.Clean the hook and feed dog as described.

3.Only use good quality sewing machine oil.

4.Replace the needle.

Remove the upper thread and bobbin case, turn

the handwheel backwards and forwards by hand

and remove the thread remands. Lubricate as

described.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carina Power Stretch 8360 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Carina Power Stretch 8360

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info