Bedienungsanleitung Carmen CR1090 - THERMOCERAMIC SLIMLINE (Seite 21 von 24) (Deutsch, Englisch, Holländisch, Französisch)

570144

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

21 • English

A guideline to determine what temperature setting is best for your hair:

This guideline indicates the optimum temperature setting.

Variable temperature adjustment

You can set the temperature with the variable temperature adjustment:

I section : from 60 to 100 degrees

II section : from 100 to 150 degrees

III section : from 150 to 200 degrees

› Operating instructions

1. After washing your hair, it’s really important to prepare it for styling. If you use lots of

heated styling tools on your hair use a heat protection spray before you begin styling.

2. Divide your hair into sections, and comb each section through. Use sectioning clips to

clip hair out of the way so you can straighten hair thoroughly.

3. Insert the plug in the socket. Turn the on/off switch to ‘on’ before use.

4. Adjust the temperature regulator to the desired temperature.

5. Place the straightener on a heat resistant surface while they are warming up and during

straightening.

6. The straightener will have reached the set temperature after 60 seconds.

7. Clamp a section of the hair between the straightening plates, as close to the roots

as possible. Gently slide the straightener down your hair shaft to the ends. For more

difﬁcult sections of hair, you may need to do this again. Repeat on all sections of the

hair.

8. Turn the on/off switch to ‘off’ to deactivate the device. Remove the plug from the

socket after use. Hang the straightener on the practical storage ring once it has cooled

down.

16 • English 17 • English

• The mains lead of the appliance must not be replaced. An appliance with a faulty or

damaged mains lead can not be repaired and must be disposed of as waste material.

Have a service provider authorised by the manufacturer inspect the product

to minimise risks.

• Use the appliance for its intended purpose only.

• Chemical waste: a defective appliance should be rendered unusable. Consult your local

authorities for information about waste disposal regulations.

ThermoCeramic technology

The ceramic coated plates ensure that the hair cuticle lies at once styled. This ensures

that your hair reects light and therefore appears healthy and shiny. The ceramic coating

also acts as a barrier to protect your hair from the high temperature reached by the

element. This minimises damage to the cuticle.

Selecting the correct heat setting

The ThermoCeramic Slimline is designed to reach very high temperatures for use on all

hair types. Most hair types can be styled perfectly without using the highest heat settings.

Where possible, you should always use the lower settings as this is safer and kinder to

your hair.

A guideline to determine what temperature setting is best for your hair:

200°

190°

180°

170°

160°

150°

140°

130°

120°

One straightener for all hair types

From fragile, thin hair to thick curly hair

Hair Types

Fragile:

very thin hair

Thin:

easily styled hair

Normal:

normal texture hair

Curly:

curly hair

Full:

thick to very thick hair

This guideline indicates the optimum temperature setting.

Variable temperature adjustment

You can set the temperature with the variable temperature adjustment:

I section : from 60 to 100 degrees

II section : from 100 to 150 degrees

III section : from 150 to 200 degrees

Operating›instructions››

1. After washing your hair, it’s really important to prepare it for styling. If you use lots of

heated styling tools on your hair use

a heat protection spray before you begin styling.

2. Divide your hair into sections, and comb each section through. Use sectioning clips to

clip hair out of the way so you can straighten hair thoroughly.

3. Insert the plug in the socket. Turn the on/off switch to ‘on’ before use.

4. Adjust the temperature regulator to the desired temperature.

5. Place the straightener on a heat resistant surface while they

are warming up and during straightening.

6. The straightener will have reached the set temperature after 30 seconds.

7. Clamp a section of the hair between the straightening plates, as close to the roots

as possible. Gently slide the straightener down your hair shaft to the ends. For more

difcult sections of hair, you may need to do this again. Repeat on all sections of

the hair.

8. Turn the on/off switch to ‘off’ to deactivate the device. Remove the plug from the

socket after use. Hang the straightener on the practical storage ring once it has

cooled down.

Cleaning›and›maintenance››

Over time, you will nd a natural build up on your straightening plates. This can be caused

by natural oils in your hair and styling products and lotions. At the rst sign of build up,

you should clean your straightening plates. To do this, always switch your straightener

off and wait for them to cool down. Wipe with a damp cloth, or a non abrasive cleaning

wipe. Failure to do this may mean the build up becomes burnt onto the straightening

plates and they will become difcult to clean. If your straightening plates do become

discoloured it will NOT affect their performance.

Disconnect the plug of the appliance from the socket outlet. Never submerge the appli-

ance in water. Do not allow dirt or hair products to build up on the appliance. Always

wait for the appliance to cool down thoroughly before cleaning.

Carmen CR1090 - THERMOCERAMIC SLIMLINE Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info