Bedienungsanleitung Carrera Digital 124 - 23605 SPORTSCAR DUEL en WIRELESS (Seite 5 von 7) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

469907

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Preparation of start

receiver/tower

TOWER

2 43

Please connect the receiver as shown in ﬁ gure

. When connect-

ing one tower it is irrelevant which speed controller-connector you

choose to connect the receiver/tower. Please take into considera-

tion that the WIRELESS system only works with the signals of the

Wireless speed controller being able to be received by the receiver,

not being interrupted by any objects or persons.

The Carrera DIGITAL 124/132 Black Box allows a mixed operation

of WIRELESS- and wired speed controllers ( up to a maximum of

6 speed controllers).

Switch on Black Box as per ﬁ gure

. Turn on speed controller on

bottom-side (ﬁ g.

). Directly after the speed controller has been

switched on the speed controller´s encoding will be indicated by

the number of ﬂ ashings, see ﬁ gure

(e.g. ﬂ ashing 3x = speed

controller 3). After 2 seconds the LED switches to a ﬂ ashing rhythm

at regular intervals indicating readiness for operation. In case the

speed controller is not activated it automatically switches to the

energy-saving mode after 20 seconds. By pressing the tappet or the

lane-change-button the speed controller can be reactivated.

Encoding Wireless

speed controller

1 42

Switch on speed controller while pressing lane-change-button on

speed controller´s bottom (ﬁ g.

). LED lights permanently

(ﬁ g.

). Release lane-change-button and push accordingly (e.g.

push 2x = speed controller 2)(ﬁ g.

). Conﬁ rm programming by

pressing speed controller´s tappet (ﬁ g.

). Successful program-

ming will be indicated by LED ﬂ ashing according to the encoding

(ﬁ g.

Insertion/exchange

of batteries

OFF/ON

1 2

To operate the WIRELESS speed controller 3 x AA (R6) batteries

are required (not included in delivery). A reduced range between the

speed controller and the receiver/tower and a minor driving perform-

ance of the vehicles are an indication of a battery power drop. In this

case the batteries need to be exchanged at the bottom of the speed

controllers (ﬁ g.

) as illustrated (ﬁ g.

Using new batteries/rechargeable batteries a permanent playing

time of approx. 48 hours or a standby time of approx. 200 hours

can be assumed.

ATTENTION:

Operation with rechargeable batteries is not possible.

Preparation of start

1 2

This Carrera DIGITAL 124 vehicle ideally matches the Carrera track

system scale 1:24.

Besides replacing the guide keel, the complete magnet units

(

) as well as the distance plates (a) beneath the magnets

may be removed and added respectively. The more distance plates

(a) and magnet units (b) are used the stronger the magnetic eﬀ ect

is on the track. As soon as a magnet is installed, the metal plate (c)

has to be used. Depending on the car type it is advisable to remove

or not to implement the spacing plate when using a Carrera crossing

or high banked curve. With those track elements being used, slight

driving noises may occur. These are caused by the cars´ scale au-

thenticity and do not have any inﬂ uence on a faultless operation.

Optimally setting up the grinders:

To ensure proper and continuous driving, slightly fan out the ends

of the contact brushes

and bend them towards the track as per

ﬁ g.

. Only the end of the contact brush should have contact to the

track and may be cut oﬀ slightly in case of wear. Dust and abrasion

should be removed from track material and sliding contacts from

time to time.

Preparation of start and

points function

1 2

Make sure that the car’s guide keel is located inside the

track slot and that the double sliding contact is in contact with the

current carrying track.

Place the cars onto the connecting track.

When changing lanes, you must keep the button on the

speed controller depressed until the car has passed the point.

Replacement of double

contact brushes and guide keel

1 2

In case the car is lifted, the rocker bar folds up slightly (ﬁ g.

For changing the guide keel or the double contact brushes the

rocker bar can be folded up widely according to ﬁ g.

For changing the guide keel and the double contact brushes the

guide keel should be removed ﬁ rst.

Afterwards both double contact brushes can be removed and

changed. Please take care that in stage one the upper contact

brush

is only pulled out partly and in stage two the double

contact brush is pulled out completely with the contact brush

For inserting please proceed the same way.

Height adjustment

rocker bar/chassis

For the use with high banked curves

In order to variably reduce or enlarge the distance between the car

and the track, the screw (a) in ﬁ g.

has to be brought either into a

lower or into a higher position.

• Screwed in = minimum ground = clearance in the front

• Unscrewed (as far as possible) = maximum ground clearance

in the front

ATTENTION! With the screw being ﬁ xed in the highest position it

is not guaranteed that the front wheels will have contact with the

track.

Carrera Digital 124 - 23605 SPORTSCAR DUEL en WIRELESS Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info