Bedienungsanleitung Carrera Digital 124 - 23607 TITANS OF RACING (Seite 7 von 8) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

469906

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Setting braking effect

 

1 – 10

(individually for one and/or several cars)





Plug any speed controller in connector 2. Switch o Black Box,

place car/s on the track, push lane-change-button and keep it

pushed while Black Box is switched on again. Don´t release the

lane-change-button until the 1st LED lights red. Levels are set by

pushing lane-change-button. Conrm braking eect by pressing

speed controller´s tappet (thumb) (=> middle LED will light). Before

the start return speed controller to the original connector!



1 LED on = low braking eect

5 LEDs on = high braking eec

Setting fuel tank capacity

Pit Stop 30346



 

1 – 10



(individually for one and/or several cars)





Activate fuelling function at the Black Box.





Plug any speed controller in connector 3. Switch o Black Box,

place car/s on the track, push lane-change-button and keep it

pushed while Black Box is switched on again. Don´t release the

lane-change-button until the 1st LED lights red. Fuel capacity is

set by pushing lane-change-button. Conrm by pressing speed

controller´s tappet (=> middle LED will light).

Before the start return speed controller to the original connector!





1 LED on = low fuel capacity

5 LEDs on = full tank



Depending on the fuel capacity the car´s lights start to ash after

some time, the car slows down and might start to stutter. For refuel-

ling enter the Pit Stop and release the speed controller´s tappet.

(Fuelling amount depends on car´s standing time in the Pit Stop).

a) Filling up: wait until car´s lights stop ashing.

b) Partial refuelling: start while car´s lights still ash.

c) Non-refuelling: car drives on at reduced speed.

Maintenance and care





To ensure a proper operation of the motor-racing circuit, all race-

track components should be regularly cleaned. Pull the plug prior to

cleaning.





 Keep the track surface and track slots clean with a

dry cloth. Do not use any solvents or chemicals for cleaning. When

it is not in use, store the racetrack in a clean and dust-protected

location, preferably in the original cardboard box.





 Clean axle and wheel bearings, pinion gears, gear-

wheels and bearings and lubricate using a resin- and acid-free

grease. You can use a toothpick or similar as aid. Regularly check

the condition of sliding contacts and tyres.

Troubleshooting

Driving tips



In case of any malfunctions, please check the following:

• Has the connection to the power supply been established cor-

rectly?

• Have transformer and speed controllers been connected

correctly?

• Are the track connections faultless?

• Are the racetrack and track slots clean and free of any foreign

objects?

• Are the sliding contacts in order and do they make contact with

the track slot?

• Are the cars correctly coded to the according speed controller?

• The track‘s current feed will be switched o automatically for 5

seconds, if there is an electrical short circuit: this will be notied by

audible and visual signals.

• Are the cars placed on the track in running direction? In case of

non-functioning push the running direction switch which is on the

car´s bottom.



During operation small car parts as spoilers or mirrors may get o or

brake due to being original detailed parts of the car model. To avoid

this it is possible to remove them before operation.



• You can drive fast along the straight track but you should brake

before the curve and then accelerate again when coming out of the

curve.

• Do not fasten or block the vehicles when the motor is running:

overheating or damage to the motor could result otherwise.

 When using track systems which are not manufactured by

Carrera the existing guide keel has to be replaced by the special

guide keel (#85309). While using the Carrera crossing (#20587) or

high banked curve 1/30° (#20574) slight driving noise might occur

which is due to the full-scale genuineness and does not aect aw-

less operation.

All Carrera spare parts are available in the webshop:



Delivery exclusively to Germany, Austria, Netherlands, Belgium and

Luxembourg.

Technical specifications



It is not possible to use rechargeable batteries.



1.) Operating mode = cars are operated via speed controllers

2.) Idle mode = speed controllers not activated, no game

3.) Stand-by mode = after approx. 20 minutes idle mode the

connecting section switches to stand-by mode. LED ashes at

long intervals.

By operating the speed controller the stand-by mode is nished,

the racetrack returns to idle-mode again.

4.) O-state = power supply unit disconnected from mains supply



14,8 V

51,8 VA

This device is marked by “selective sort throught” symbol related to

sort through domestic, electric and electronic, waste. This means

the product must be treated by a specialized “sorting/collecting” sys-

tem in accordance with European directive 2002/96/CE, to reduce

the impact upon environment. For more precise information, please

contact your local administration. Electronical product which are not

going through special collecting, are potentially dangerous for envi-

ronment and human health, because of dangerous substance.



14,8 V 42,9 VA

Carrera Digital 124 - 23607 TITANS OF RACING Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info