Bedienungsanleitung Casio 1949 (Seite 2 von 2) (Englisch)

522080

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

1949-2

STOPWATCH MODE

The Stopwatch Mode lets you measure elapsed time, split

times, and two finishes. The range of the stopwatch is 23

hour, 59 minutes, 59.99 seconds. You can also have an

alarm sound when a target time is reached. The Stop-

watch Mode also features an Auto-Start function.

About the Auto-Start function

With the Auto-Start function, the watch performs a 5-second countdown. When the

countdown reaches zero, stopwatch operation starts automatically. During the final

three seconds of the countdown, a beeper sounds with each second.

To turn the Auto-Start function on and off

While the display is showing all zeros in the Stopwatch Mode, press

B to toggle it on

and off.

• The indicator AUTO-ST appears and 05 is shown in the upper display while Auto-

Start is turned on. The AUTO-ST indicator is not shown and the upper part of the

display shows the current time when Auto-Start is turned off.

About the Target Time function

With the Target Time function, an alarm sounds for ten seconds whenever the time

being kept by the stopwatch reaches a target time you have preset.

To set the Target Time and to turn it on and off

1.While the display is showing all zeros in the Stopwatch

Mode, hold down

A, and the hour digit of the target

time starts to flash because it is

selected

Press

to change the selection in the following sequence.

Hour Minutes Seconds

3.Press

D to increase the selected number or

B to de-

crease it. Holding down either button changes the se-

lection at high speed.

• Press

D and

B at the same time to clear the setting to

0:00' 00".

4.Press

A to move the flashing to the target time ON/OFF setting.

D or

B to toggle the target time on and off.

6.Press

A to return to the Stopwatch Mode.

Important!

The alarm will not sound if you do not turn on the target time.

• Press

C C

C or

L L

L to stop the alarm after it starts to sound.

Current time

Target time on indicator

Mode indicator

Minutes

Seconds

1/100 Seconds

Seconds

Hour

Minutes

Mode indicator

Target time on indicator

Alarm on indicator

Hour Minutes

Mode indicator

Hourly time signal on

indicator

Current time

ALARM MODE

When the Daily Alarm is switched on, the alarm sounds

for 20 seconds at the preset time each day. Press any

button to stop the alarm after it starts to sound. When the

Hourly Time Signal is on, the watch beeps every hour on

the hour.

To set the alarm time

1.Hold down

A until the hour digits start to flash on the

display. The hour digits flash because they are

select-

• This operation will switch the Daily Alarm on automati-

cally.

2.Press

C to change the selection in the following se-

quence.

Hour Minutes

3.Press

D to increase the selected digits and

B to decrease them. Holding down

either button changes the selection at high speed.

• The format (12-hour and 24-hour) of the alarm time matches the format you select

for normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as morning (no indicator) or afternoon (P).

4.After you set the alarm time, press

A to return to the Alarm Mode.

To turn the daily alarm and hourly time signal on and off

Press

B while in the Alarm Mode to change the status of the daily alarm and hourly

time signal in the following sequence.

Both ON

Hourly Time

Signal Only

Daily Alarm

Only

Both OFF

• The alarm on indicator ( ) and the Hourly Time Signal on indicator (

) are

shown on the display in all modes while these functions are turned on.

To test the alarm sound

Hold down

B while in the Alarm Mode to sound the alarm.

• Note that pressing

B also changes the alarm and the hourly time signal ON/OFF

settings.

DUAL TIME MODE

The Dual Time Mode lets you keep track of the time in

another time zone. You can also select the timekeeping

format (12-hour or 24-hour) separately from the Timekeep-

ing Mode.

To set the Dual Time

1.Hold down

A while in the Dual Time Mode. The hour

digits flash on the display because they are

selected

2.Press

C to change the selection in the following se-

quence.

Hour

Minutes

3.Press

D to increase the selected digits and

B to de-

crease them. Holding down either button changes the

selection at high speed.

4.After you set the time, press

A to return to the Dual Time Mode.

• In the Dual Time Mode, the seconds count is synchronized with the seconds count

of the Timekeeping Mode.

• In the Dual Time Mode, press

B to toggle between the 12-hour and 24-hour for-

mats.

Current time

Hour

Minutes

Mode indicator

(a) Elapsed time measurement

Start

Stop Re-start Stop Clear

Start

Split Split release Stop Clear

Start

Split Stop Split release Clear

(b) Split time measurement

First runner

finishes.

Second runner

finishes.

Record time of

first runner.

Record time of

second runner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 1949 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 1949

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info