Bedienungsanleitung Casio 3171 (Seite 2 von 2) (Englisch)

522103

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Operation Guide 3171

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

• The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C.

Minutes

Seconds Hours

Mode indicator

1/100 second

To measure times with the stopwatch

Elapsed time

Start Stop Re-start Stop Clear

Start

Split

(SPL displayed)

Split release Stop Clear

Start

Split Stop Split release Clear

Split time

Two Finishes

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

Three-second indicator

Seconds Hour : Minutes

Timekeeping Mode time

(Hour : Minutes)

Mode indicator

Dual Time

The Dual Time Mode lets you keep track of time in a

different time zone.

• In the Dual Time Mode, the seconds count is

synchronized with the seconds count of the Timekeeping

Mode.

To set the Dual Time

1. Press C to enter the Dual Time Mode.

2. Hold down A until the hour setting starts to flash, which

indicates the setting screen.

3. Press C to move the flashing between the hour and

minutes settings.

4. Press B to increase the setting. Holding down B

changes the setting at high speed.

5. Press A to exit the setting screen.

Illumination

The watch has an EL (electro-Iuminescent) panel that

causes the entire display to glow for easy reading in the

dark.

• See “Illumination Precautions” for other important

information.

To illuminate the display

In any mode, press L to illuminate the display.

• You can specify 1.5 seconds or three seconds as the

illumination duration. See “To specify the illumination

duration” for more information.

To specify the illumination duration

In the Timekeeping Mode, hold down B for about two seconds to toggle the

illumination duration between three seconds (

displayed) and 1.5 seconds

(

not displayed).

• Pressing B also toggles between 12-hour and 24-hour timekeeping.

• When the three-second setting is selected, the three-second (

) indicator remains

on the display in all modes.

• To protect against running down the watch’s battery, the watch automatically

switches to the 1.5-second setting about seven hours after the three-second setting

is selected. To continue to use the three-second setting, perform the above

procedure again.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto return features

If you leave a screen with flashing digits for one or two minutes without performing

any operation, the watch automatically saves any settings you have made up to that

point and exits the setting screen.

Illumination Precautions

• The electro-luminescent panel that provides illumination loses power after very long

use.

• Illumination may be hard to see when viewed under direct sunlight.

• Illumination automatically turns off whenever an alarm sounds.

• The watch may emit an audible sound whenever the display is illuminated. This is

due to vibration of the EL panel used for illumination, and does not indicate

malfunction.

• Frequent use of illumination runs down the battery.

Specifications

Accuracy at normal temperature: ±20 seconds a month

Timekeeping: Hour, minutes, seconds, p.m., month, day, day of the week

Time system: Switchable between 12-hour and 24-hour formats

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Alarm:

Daily alarm; Hourly Time Signal

Stopwatch

Measuring unit: 1/100 second

Measuring capacity: 23:59' 59.99''

Measuring modes: Elapsed time, split time, two finishes

Dual Time: Hour, minutes, seconds, p.m.

Illumination: EL backlight (electro-luminescent panel); Selectable illumination

duration

Battery: One lithium battery (Type: CR1216)

Approximately 3 years on type CR1216 (assuming alarm operation 10 seconds/day,

and one light operation 1.5 seconds/day)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 3171 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3171

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info