E-16
Approximate Reception Ranges
UK and German Signals
Anthorn
500 kilometers
1,500 kilometers
The Anthorn signal is
receivable within this area
Mainflingen
North American Signal
Japanese Signals Chinese Signal
500 kilometers
Changchun
Beijing
Shangqiu
Shanghai
Chengdu
Hong Kong
1,500 kilometers
2,000 miles
(3,000 kilometers)
600 miles
(1,000 kilometers)
Fort Collins
1,000 kilometers
Signals are receivable in the Taiwan area
when reception conditions are
ood.
For the Honolulu and Anchorage time zones, the
signal can be received when reception conditions
are favorable.
Fukuoka/Saga
500 kilometers
Fukushima
E-17
• Even when the watch is within range of a transmitter, signal reception may be impossible due to the
effects of geographic contours, structures, weather, the time of year, the time of day, radio interference,
etc. The signal becomes weaker at distances of approximately 500 kilometers, which means that the
infl
• Signal reception may not be possible at the distances noted below during certain times of the year or
day. Radio interference may also cause problems with reception.
Mainfl
Fort Collins (United States) transmitter: 600 miles (1,000 kilometers)
Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310 miles)
Shangqiu (China) transmitter: 500 kilometers (310 miles)
• As of December 2012, China does not use Daylight Saving Time (DST). If China does go to the Daylight
Saving Time system in the future, some functions of this watch may no longer operate correctly.
To get ready for a receive operation
1. Confi
D
to enter the
Timekeeping Mode or World Time Mode (page E-26).
2. The antenna of this watch is located on its 12 o’clock side. Position the watch with 12 o’clock facing
towards a window as shown in the nearby illustration. Make sure there are no metal objects nearby.
• Sig
• The re
in so
care t
move th
12 o’clock
or
12 o’clock
or
E-18
• Signal reception ma
Inside or
among
buildings
Inside a
vehicle
Near
household
appliances,
offi
equipment,
or a mobile
phone
Near a
construction
site, airport
Near
high-tension
power lines
Among or
behind
mountains
3. What you should do next depends on whether you are using auto receive or manual receive.
• Auto re
below for details.
• Man
Auto Receive
• With auto receive, the watch performs the receive operation each day automatically up to six times (up
to fi
the Timekeeping Mode time). When any receive operation is successful, none of the other receive
operations for that day are performed.
• When a calibration time is reached, the watch will perform the receive operation only if it is in the
Timekeeping Mode or World Time Mode. The receive operation is not performed if a calibration time is
reached while you are confi
E-19
• You can use the procedure under “To turn auto receive on and off” (page E-22) to enable or disable
auto receive.
To perform manual receive
1. Use
D
to select the Receive Mode (
R/C
) as shown on page E-26.
2. Hold down
A
until
RC Hold
appears on the display and then
disappears.
• A signL1 , L2 , or L3 , see p
on th
move aGET orERR
appe
• If th
appeGET indicator
The wa
D
or
if you d
minutes.
Receiving
Receiving indicator
Receive successful
Receiving
Receiving indicator
Receive successful
E-20
• If the c
last 24 h
indiERR indicatorERR indica
disp
rece
The wa
the t
D
or if yo
ope
Note
• Y
pressing any
Receive failed
If there was a previously
successful reception
Receive failed
If there was a previously
successful reception
E-21
Signal Level Indicator
During manual receive, the signal level indicator displays the signal level
as shown below.
Weak (Unstable) Strong (Stable)
The level indication will change in accordance with reception conditions
while reception is being performed.
As you watch the indicator, keep the watch in a location that best
maintains stable reception.
• Even under optimum reception conditions, it can take about 10
seconds for reception to stabilize.
• Note that weather, the time of day, surroundings, and other factors all
can affect reception.
E-22
To check the latest signal reception results
Enter the Receive Mode (page E-26).
• When receive is successful, the display shows the time and date that
receive was successful.
- : - -
indicates that none of the reception
operations were successful.
• To return to the Timekeeping Mode, press
D
.
To turn auto receive on or off
1. Enter the Receive Mode (page E-26).
2. Hold down
E
for at least two seconds. Release
E
after
AUTO
appears. This is the setting screen.
• Note t
Ho
3. Press
A
to toggle auto receive between on (
On
) and off (
OFF
).
4. Press
E
to exit the setting screen.
On/Off status
E-23
Radio-controlled Atomic Timekeeping Precautions
• Strong electrostatic charge can result in the wrong time setting.
• Even if a receive operation is successful, certain conditions can cause the time setting to be off by up
to one second.
• The watch is designed to update the date and day of the week automatically for the period January 1,
2000 to December 31, 2099. Updating of the date by signal reception will no longer be performed
starting from January 1, 2100.
• If you are in an area where signal reception is not possible, the watch keeps time with the precision
noted in “Specifi
• The receive operation is disabled under any of the following conditions.
– While power is at Level 3 (L) or lower (page E-11)
– While the watch is in the power recovery mode (page E-13)
– While a direction, barometric pressure/temperature, or altitude reading operation is in progress
– When the watch is in the function sleep state (“Power Saving”, page E-14)
– While the barometric pressure change indicator is displayed
– While a countdown timer operation is in progress (page E-79)
• A receive operation is cancelled if an alarm sounds while it is being performed.
• The Home City setting reverts to the initial default of
TYO
(Tokyo) whenever the battery power level
drops to Level 5 or when you have the rechargeable battery replaced. If this happens, change the
Home City to the setting you want (page E-31) .
Operation Guide 3410
