624860

Casio 5269 - SGW-500 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
E-70
Troubleshooting
Time Setting
■
Why is the current time setting off by a couple of hours?
Your Home City setting may be wrong (page E-17). Check your Home City setting and
correct it, if necessary.
■
Why is the current time setting off by one hour?
You may need to change your Home City’s standard time/daylight saving time (DST)
setting. Use the procedure under “To change the current time and date settings” (page
E-22) to change the standard time/daylight saving time (DST) setting.
Sensor modes
■
Why can’t I change the temperature unit setting?
The temperature unit setting is always Celsius (
°C
) whenever
TOKYO
is selected as
the Home City. In this case, the setting cannot be changed.
E-71
■
Why does “ERR” appear while a sensor operation is in progress?
Subjecting the watch to strong impact can cause sensor malfunction or improper
contact of internal circuitry. When this happens,
ERR
(error) will appear on the digital
display and sensor operations will be disabled.
Direction Reading and
Temperature Measurement
• If
ERR
appears while a measurement operation is being performed in a sensor
mode, restart the measurement. If
ERR
appears on the digital display again, it can
mean there is something wrong with the sensor.
• If
ERR
keeps appearing during measurement, it can mean there is a problem with
the applicable sensor.
E-72
■
Why does “ERR” appear on the digital display following bidirectional
calibration?
If
- - -
appears and then changes to
ERR
(error) on the calibration screen, it means
that there is something wrong with the sensor.
• If
ERR
disappears after about one second, try performing the calibration again.
• If
ERR
keeps appearing, contact your original dealer or nearest authorized CASIO
distributor to have the watch checked.
Whenever you have a sensor malfunction, take the watch to your original dealer or
nearest authorized CASIO distributor as soon as possible.
■
What causes incorrect direction readings?
• Incorrect bidirectional calibration. Perform bidirectional calibration (page E-36).
• Nearby source of strong magnetism, such as a household appliance, a large steel
bridge, a steel beam, overhead wires, etc., or an attempt to perform direction
measurement on a train, boat, etc. Move away from large metal objects and try
again.
E-73
■
What causes different direction readings to produce different results at the
same location?
Magnetism generated by nearby high-tension wires is interfering with detection of
terrestrial magnetism. Move away from the high-tension wires and try again.
■
Why am I having problems taking direction readings indoors?
A TV, personal computer, speakers, or some other object is interfering with terrestrial
magnetism readings. Move away from the object causing the interference or take the
direction reading outdoors. Indoor direction readings are particularly diffi cult inside
ferro-concrete structures. Remember that you will not be able to take direction
readings inside of trains, airplanes, etc.
E-74
Battery
■
Why is the low battery alert fl ashing?
Battery power is low. Watch operations are disabled while
the low battery alert is fl ashing on the digital display.
If the low battery alert disappears after battery power
recovers but then starts to fl ash again after a short while,
it means that you need to have the watch’s battery
replaced.
Low battery alertLow battery alert
E-75
Specifi cations
Accuracy at normal temperature:
±30 seconds a month
Digital Timekeeping:
Hour, minutes, seconds, a.m. (A)/p.m. (P), month, day, day of
the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other:
Home City (can be assigned one of 48 city codes); Standard Time / Daylight
Saving Time (summer time)
Analog Timekeeping:
Hour, minutes (hand moves every 10 seconds), seconds
Digital Compass:
North indicated by second hand; 20 seconds continuous readings;
Calibration (bidirectional); Magnetic declination correction; Magnetic north
indication; display of one of 16 direction indicators; Angle value 0° to 359°
Thermometer:
Measurement and display range: –10.0 to 60.0°C (or 14.0 to 140.0°F)
Display unit: 0.1°C (or 0.2°F)
Reading timing: 5-second intervals for 1 to 2 minutes
E-76
Bearing Sensor Precision:
Direction: Within ±15°
Values are guaranteed for a temperature range of –10°C to 40°C (14°F to 104°F).
Temperature Sensor Precision:
±2°C (±3.6°F) in range of –10°C to 60°C (14.0°F to 140.0°F)
Moon Age:
Display of Moon age values for specifi c dates
Sunrise/Sunset:
Sunrise time and sunset time for specifi c date
Alarms:
5 daily alarms; hourly time signal
Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 23:59 59.99
Measuring modes: Elapsed time, split time
Countdown Timer:
Measuring unit: 1 second
Countdown start time setting range: 1 second to 100 minutes (1-minute
increments and 1-second increments)
E-77
World Time:
48 cities (31 time zones)
Other: Daylight Saving Time/Standard Time
Illumination:
LED (Light-emitting diode); Selectable illumination duration
(approximately 1.5 seconds or 3 seconds)
Other:
Button operation tone on/off
Battery:
Two silver oxide batteries (Type: SR927W)
Approximate battery operating time: 2 years under the following conditions:
• 1 illumination operation (1.5 seconds) per day
• 20 seconds of continuous direction readings, 20 times per month
• 2 minutes of continuous temperature readings (5-second intervals), once per
week
• 20 seconds of alarm operation per day
Frequent use of illumination runs down the battery.
City Code Table
UTC Offset/
GMT Differential
City Name Latitude (°)
North Latitude +,
South Latitude –
Longitude (°)
East Longitude +,
West Longitude –
0.0 UTC 51.5 0
0.0 Lisbon 38.7 –9.1
0.0 London 51.5 –0.1
1.0 Madrid 40.4 –3.7
1.0 Paris 48.9 2.4
1.0 Rome 41.9 12.5
1.0 Berlin 52.5 13.4
1.0 Stockholm 59.3 18.1
2.0 Athens 38.0 23.7
2.0 Cairo 30.0 31.2
L
L-1
UTC Offset/
GMT Differential
City Name Latitude (°)
North Latitude +,
South Latitude –
Longitude (°)
East Longitude +,
West Longitude –
2.0 Jerusalem 31.8 35.2
3.0 Moscow 55.8 37.6
3.0 Jeddah 21.5 39.2
3.5 Tehran 35.7 51.4
4.0 Dubai 25.3 55.3
4.5 Kabul 34.5 69.2
5.0 Karachi 24.9 67.0
5.5 Delhi 28.6 77.2
5.75 Kathmandu 27.7 85.3
6.0 Dhaka 23.7 90.4
6.5 Yangon 16.8 96.2
7.0 Bangkok 13.7 100.5
Operation Guide 5269
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio 5269 - SGW-500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Casio 5269 - SGW-500

Casio 5269 - SGW-500 Bedienungsanleitung - Deutsch - 9 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info