Bedienungsanleitung Casio 5311 - GW-A1100 (Seite 10 von 11) (Englisch)

624480

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Operation Guide 5311

L-1

City Code Table

E-97

Power Supply: Solar panel and one rechargeable battery

Approximate battery operating time: 6 months (no exposure to light after a full

charge; 10 seconds beeper operation, one signal reception of approximately 4

minutes per day; 20 direction reading operations per month)

E-96

Compass: 20 seconds continuous reading; North indication by hand; Calibration

(bidirectional, northerly); Manual reading

World Time: 29 cities (29 time zones) and Coordinated Universal Time

Other: Daylight Saving Time (summer time) / Standard Time

Stopwatch: Measuring capacity: 1:59'59.95"

Measuring unit: 1/20 (0.05) seconds

Measuring mode: Elapsed time

Flyback timing

Countdown Timer:

Measuring unit: 1 second

Input range: 1 to 60 minutes (1-minute increments)

Alarm: Daily alarm

Other: Power Saving; Auto Correction of Hand Home Positions

E-95

Speciﬁ cations

Accuracy at normal temperature: ±15 seconds a month (with no signal calibration)

Timekeeping: Hour, minutes (hand moves every 10 seconds), seconds, day

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Home City code (can be assigned one of 29 city codes and Coordinated

Universal Time); Daylight Saving Time (summer time) auto switching /

Standard time, Day of the week

Time Calibration Signal Reception: Auto receive up to six times a day (5 times a

day for the Chinese calibration signal; Remaining auto receives

cancelled as soon as one is successful); Manual receive

Receivable Time Calibration Signals:

Mainﬂ ingen, Germany (Call Sign: DCF77, Frequency: 77.5 kHz);

Anthorn, England (Call Sign: MSF, Frequency: 60.0 kHz); Fukushima,

Japan (Call Sign: JJY, Frequency: 40.0 kHz); Fukuoka/Saga, Japan

(Call Sign: JJY, Frequency: 60.0 kHz); Fort Collins, Colorado, the

United States (Call Sign: WWVB, Frequency: 60.0 kHz); Shangqiu City,

Henan Province, China (Call Sign: BPC, Frequency: 68.5 kHz)

E-94

■ The indicated World Time is one hour off.

The daylight saving time (summer time) setting for the World Time city is wrong.

See “To view the time in another time zone” (page E-64).

Alarm

■ The alarm does not sound.

x Power may be low. Expose the watch to light until the

Second Hand starts moving

normally, at one-second intervals (page E-16).

x The time setting is wrong in terms of a.m. and p.m.

x The crown may be pulled out. Push the crown back in.

E-93

■ Signal reception is being performed successfully, but the time and/or day is

wrong.

Possible Cause Remedy Page

Your Home City setting is wrong.

Check your Home City setting and

correct it, if necessary.

E-20

E-36

The watch may have been exposed to

magnetism or strong impact, which has

caused problems with proper hand and

day indicator alignment.

Adjust the watch’s hand and day

indicator home positions.

E-79

World Time

■ The indicated World Time is wrong.

There is a problem with your Home City settings.

Check your Home City settings.

See “To conﬁ gure Home City settings” (page E-36).

E-92

■ Auto Receive is not performed or I cannot perform Manual Receive.

Possible Cause Remedy Page

The watch is in the World Time Mode.

The watch is in the Stopwatch Mode.

Auto Receive is not performed while

the watch is in the World Time Mode or

Stopwatch Mode. Hold down C at least

two seconds to enter the Timekeeping

Mode.

E-27

E-34

Your Home City setting is wrong.

Check your Home City setting and

correct it, if necessary.

E-20

E-36

Auto time calibration signal reception

is OFF.

Check the auto time calibration signal

reception setting.

E-30

A direction reading or countdown timer

operation is in progress.

Stop the ongoing operation.

E-48

E-72

There is not enough power for signal

reception.

Expose the watch to light to charge it. E-14

E-91

■ The current time setting changes after I set it manually.

You may have the watch conﬁ gured for Auto Receive of the time calibration signal

(page E-27), which will cause the time to be adjusted automatically according to your

currently selected Home City. If this results in the wrong time setting, check your

Home City setting and correct it, if necessary (page E-36).

■ The current time setting is off by one hour.

Possible Cause Remedy Page

The period when summer time is applied

in the location where you are using the

watch may be different from the period

set for your currently selected Home City.

Use the procedure under “To switch

between standard time and summer time

manually” to switch from AT (AUTO)

to STD (for standard time) or DST (for

summer time).

E-39

E-90

■ The

Second Hand indicates N (NO) when I check the result of the latest

receive operation.

Possible Cause Remedy Page

x You are wearing or moving the watch,

or performing a button operation

during time calibration signal receive

operation.

x The watch is in an area with poor

reception conditions.

Keep the watch in an area where

reception conditions are good while time

calibration signal receive operation is

being performed.

E-25

You are in an area where signal reception

is not possible for some reason.

See “Approximate Reception Ranges”. E-22

The alarm time was reached during time

calibration signal reception.

The alarm sounded during time

calibration signal reception, causing

reception to be canceled.

—

The calibration signal is not being

transmitted for some reason.

x Check the website of the organization

that maintains the time calibration

signal in your area for information about

its down times.

x Try again later.

—

Casio 5311 - GW-A1100 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5311 - GW-A1100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info