Bedienungsanleitung Casio E115 (Seite 64 von 67) (Englisch)

27056

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

• For international calls, allow more time for the call to go through. Tap and then Settings.

On the Connections tab, tap Modem. Tap your connection and tap Next twice. Clear Cancel

the call if not connected within or increase the number of seconds allowed. For information

on dialing patterns, see Connections Help on the Pocket PC.

Can dial out but can’t make a proper connection

• Make sure the network to which you are trying to connect supports the Point-to-Point Protocol

(PPP). Your Internet service provider or network administrator can verify this.

• Verify that the location is correct. Tap

and then Settings. On the Connections tab, tap

Modem. On the Dialing tab, make sure that Location reflects your current location. Tap

Dialing Patterns to make sure the correct sequence of numbers is being dialed. For

information on dialing patterns, see Connections Help on the Pocket PC.

• Verify that you are using the right phone number for the modem you are trying to reach Tap

and then Settings. On the Connections tab, tap Modem. Tap the connection and then Next and

double-check the phone number you are trying to reach.

Connection is unreliable

• Make sure the modem is firmly seated and connected to your Pocket PC and the telephone jack.

• Disable call waiting. Tap

and then Settings. On the Connections tab, tap Modem. On the

Dialing tab, select Disable call waiting. Then enter the disable code specified by your

telephone company.

Network connection problems

The following solutions may help if you encounter problems when using a network card for

network connections. Additional troubleshooting information is available in Connections Help on

the Pocket PC and ActiveSync Help on the desktop computer.

• Verify that you have an Ethernet card that is compatible with your Pocket PC.

• Verify that you have added necessary server information. Tap

and then Settings. On the

Connections tab, tap Network. Tap your installed adapter (usually your Ethernet card’s name)

and enter any necessary information. Most networks use DHCP, so you should not have to

change these settings unless your network administrator instructs you to do so.

• If Network Connection isn’t listed as a connection method in the ActiveSync dialog box when

starting synchronization, wait a few minutes and try again. Also, if synchronization does not

start right away, the network is probably busy, and it may take a minute for your Pocket PC to

connect to the network.

• Make sure that the proper drivers for your card are installed on the Pocket PC. For more

information, see the owner’s manual for the network card.

• Verify with your network administrator that your user name and password are correct.

• Verify with your network administrator that the network you are trying to connect to is

available, or try to connect to it from another computer.

• You may need to change the Pocket PC name if you are trying to connect to a network and

cannot because another Pocket PC with the same name is already connected. To change the

Pocket PC name, tap

and then Settings. On the System tab, tap About, and then the Pocket

PC ID tab.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio E115 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info