Bedienungsanleitung Casio KL8100 (Seite 28 von 31) (Englisch)

506038

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

E-27

Troubleshooting

••

•

Power Supply

••

•

Text Input

Nothing appears on the display.

Possible Cause Action

Improper display con-

trast setting

Low batteries

Batteries loaded incor-

rectly

AC adaptor is not con-

nected correctly.

Adjust display contrast.

Replace batteries.

Remove batteries and reload

them correctly.

Make sure the AC adaptor is

connected correctly.

Only blank spaces

were input.

Input the text you want to print.

Tape comes out when PRINT is pressed, but nothing

is printed on it.

Possible Cause Action

Improper print density

setting

Improper loading of

the cartridge

Dirty print head or rub-

ber roller

Adjust the print density setting.

Remove the tape cartridge and

reload it correctly.

Clean the printer head and

roller.

Printing is blurred, blotched, broken, etc.

Possible Cause Action

Ink ribbon cassette

loaded while the ink

ribbon is slack.

Remove the ink ribbon cassette

and check to make sure the ink

ribbon is not broken. Next, take

up any slack in the ink ribbon

and then reload the tape car-

tridge.

Important!

• Before loading an ink ribbon

cassette into the label printer,

always make sure you take

up any slack in the ink ribbon

first.

• If the ink ribbon is broken, you

must change to another ink

ribbon cassette.

Ink ribbon is being fed from the tape outlet along

with the tape.

Possible Cause Action

••

•

Tape Cutting

••

•

Using Labels

Cannot input text.

Possible Cause Action

FUNC key has been

pressed.

Press ESC to clear FUNC key

operation.

Tape does not come out when PRINT is pressed.

Possible Cause Action

Tape cartridge com-

partment cover is not

closed completely.

No more tape left in

the cartridge.

Tape jam

Securely close the tape car-

tridge cover.

Replace the tape cartridge with

a new one.

Remove the tape cartridge and

pull out the jammed tape by

hand. Cut off excess tape with

scissors, and carefully replace

the cartridge into the label printer.

Important!

Never allow the tape outlet to

become blocked and never

touch tape as it is being fed

during printing.

Cannot cut tape.

Possible Cause Action

Take the label printer to the

dealer from whom you pur-

chased it to have the tape cut-

ter blade replaced.

Printed text is cut off by tape cut operation.

Possible Cause Action

The printer is set up for

manual tape feed.

Out of tape

Be sure to press the FEED key

before performing the tape cut

operation.

Important!

When the printer is set up for

manual tape feed, the tape is

not fed automatically after print-

ing is complete.

Replace the tape cartridge with

a new one.

Tape cutter blade is

dull.

Label will not adhere to a surface.

Possible Cause Action

The backing paper is

still on the back of the

tape.

Surface is unsuitable

for affixing a tape.

Peel the backing paper from the

back of the tape to expose the

adhesive.

Labels do not adhere well to

surfaces that are rough, wet,

oily, or dirty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL8100 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL8100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info