Bedienungsanleitung Casio QV-120 (Seite 15 von 17) (Englisch)

585959

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Using QV-Link Software and a Connection Cable

The optionally available QV-Link Software and connection cable lets

you transfer images from your digital camera to a personal computer.

The following are the computer models that can run QV-Link soft-

ware.

Windows Version: LK-10V

Macintosh Version: LK-2V

Important!

• This camera does not fully support the software that comes with the

LK-1 and LK-1A connection kits for Windows, and the LK-2 and LK-

2A connection kits for the Macintosh. Never try to use the software

that comes with these connections kits with this digital camera.

Connecting to a QV color Printer

DIGITAL

You can connect this camera to a CASIO QV color Printer and print-

out images that are in camera memory. Use the communication cable

that comes with the QV Color Printer to connect camera's DIGITAL

terminal to the QV Color Printer's terminal.

Applicable printer model: CASIO QG-100

After connecting the two units, turn on camera power and slide the

function switch to the PLAY position. For details on how to perform

the QV Color Printer procedures required for printing, see the docu-

mentation that comes with the QV Color Printer.

Using the Camera with a Connected Device

Computer (Video Capture)

VIDEO

You can use the special video cable that comes with the camera to

connect directly to the VIDEO IN terminal of a personal computer

equipped with video capture capabilities.

To transfer camera images to a personal computer (video

capture)

1. Use the special video cable that comes with the camera to connect

to the VIDEO IN terminal of the computer.

2. Enter the camera Playback Mode and display the image you want

to send.

3. Perform the required operation on the computer.

• Consult the owner’s guide that comes with the computer or its video

capture board for details about how to set up to capture images.

Important!

• With this configuration, you cannot send images from the personal

computer to the camera.

• The camera can be connected directly to a personal computer or

video capture board that is equipped with a VIDEO IN terminal

(RCA pin jack). It cannot be connected directly to an S-VIDEO ter-

minal.

Troubleshooting

No power

Sudden power

failure

indicator

on LCD

No recording

when shutter

button is

pressed

Power failure

during self-timer

operation

indicator on

LCD

indicator on

LCD

1. Batteries not loaded

correctly.

2. Dead batteries

3. Wrong AC adaptor

1. Operation of Auto

Power Off

2. Low battery power

Use of manganese

batteries.

Low battery power

Function switch sets to

PLAY.

Low battery power

Over exposure

Under exposure

1. Correctly load batter-

ies (page 13).

2. Replace batteries with

new ones (page 13).

3. Use only recom-

mended AC adaptor .

1. Turn power back on.

2. Replace batteries with

new ones (page 13).

Replace manganese

batteries with alkaline

batteries.

Replace batteries (page

13).

Set function switch to

REC.

Replace batteries (page

13).

Change aperture switch

setting to [ ] (page 26).

Change aperture switch

setting to [ ] (page 26).

Symptom Probable Cause Action

Power Supply

Recording

Reference

Sympton Probable Cause Action

Poor LCD image

focus

Poor color and

brightness when

indoors

Recorded image

has greenish

tinge.

Color of

recorded image

is strange.

No +/– button

operation during

multi-page dis-

play

All pages do not

appear during

auto play.

Use NORMAL for scen-

ery and group photos,

and MACRO for close-

ups (page 24).

Shoot under incandes-

cent or other non-fluores-

cent lighting (page 21).

Change aperture setting

to [ ]. Note that this con-

dition is due to CCD char-

acteristics, and does not

indicate camera malfunc-

tion.

1. Reorient the camera

so that light is not shin-

ing directly into lens.

2. This difference does

not indicate a problem

or malfunction.

Wait until an image is on

the LCD before perform-

ing a button operation.

Unhide protected memo-

ry pages (page 45).

Incorrect NORMAL/

MACRO switch setting

Indoor fluorescent lighting

Strong direct or reflected

sunlight

1. Reflection from sun-

light or light from an-

other source

2. Difference between

Record Mode and

Playback Mode char-

acteristics.

Button operation during

page change

Protected memory pages

are hidden.

Recording

Playback

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio QV-120 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info