Bedienungsanleitung Cateye CC-RD420DW (Seite 5 von 9) (Englisch)

508121

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

CC-RD420DW ENG

Starting/Stopping measurement

Measurements start automati-

cally when the bicycle is in

motion.

During measurement, km/h or

mph ﬂashes.

Upper display selection

The heart rate ( ) or the cadence ( ) can be switched to the upper dis-

play to monitor it constantly.

Setting method

See “Changing the computer settings: Setting the upper

display” (Page 6).

* The optional speed sensor (ISC-10) is required to measure the cadence.

Resetting data

Pressing and holding the MODE button on the measure-

ment screen resets any measurement data, except the

total distance (Odo) and trip distance-2 (Dst2).

* The total distance (Odo) is not reset.

• Resetting separately the trip distance-2

Pressing and holding the MODE button with the trip distance-2 (Dst2)

displayed resets only the data of the trip distance-2.

Power-saving function

If the computer has not received a signal for 10 minutes, power-saving

screen will activate and only the clock will be displayed.

With such a screen, pressing the MODE button returns to the measure-

ment screen.

* If another 60 minutes of inactivity elapses in the power-saving screen,

only the speed unit is displayed on the screen.

START STOP

MODE

Operating the computer [Measuring screen]

HR sensor signal icon

It ﬂashes in synch with a heart rate sensor signal.

* The position changes according to the heart rate

display position.

Elapsed Time

0:00’00” – 9:59’59”

Clock

0:00 – 23:59

Heart rate

0(30) – 199 bpm

(Cadence *1)

Total Distance

0 – 99999 km[mile]

Trip Distance

0.00 – 999.99 km

[mile]

Maximum Speed

0.0(4.0) – 105.9 km/h

[0.0(3.0) – 65.9 mph]

Trip Distance-2

0.00 – 999.99 km

[mile]

Average Speed (*2)

0.0 – 105.9 km/h

[0.0 – 65.9 mph]

Switching computer function

Pressing the MODE button switches the measurement data at the bottom in the order shown in the following ﬁgure.

Current

speed

Current speed

Cadence (*) Heart

rate

Heart rate Heart rate/Current speed

Start measurement Stop measurement

Current speed

0.0 (4.0) – 105.9 km/h

[0.0 (3.0) – 65.9 mph]

* “S” icon is displayed when

displaying current speed at

the bottom.

Pace arrow

Indicates if the current speed is faster or slower

than the average speed. ( Faster, Slower)

Sensor icon

The speed sensor currently synchronized is dis-

played.

Speed unit

*1 In combination with the optional speed sensor (ISC-10), it displays the cadence.

*2 When Tm exceeds about 27 hours, or Dst exceeds 999.99 km, .E will appear. Reset the data.

MODE

MODE MODE MODE

MODE MODE

MODE

Option *1

Speed sensor

(ISC-10)

Click

MODE operation when

the computer is mount-

ed on the bracket

Speed sensor signal icon

It ﬂashes in synch with a speed sensor signal.

Measuring screen

10 minutes 60 minutes

Power-saving screen Sleep screen

(Press

& hold)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye CC-RD420DW Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cateye CC-RD420DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info