791757
4
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
www.celestron.com
4
SETTING UP AMOEBA
1. Carefully remove the microscope tube
(module) and base with stand (silver part)
from box and set on a table, desk or other
flat surface.
2. Carefully slide the microscope tube into
the arms of the microscope base and stand
until the wide section around the power
ring rests against the arms.
3. The metal terminals at the back of the
microscope tube should make contact with
the terminals at the back of the arm (on
base). These terminals supply power from
the computer’s USB port to the microscope
base for the bottom illuminator.
USING AMOEBA FOR VIEWING
AND/OR IMAGING
Before using Amoeba for viewing or imaging
on your computer screen, ensure the driver is
recognized by your computer. Amoeba utilizes
a “Plug and Play” system where the computer
should automatically recognize the driver type on
Microsoft Windows 7, XP, Vista and some 2000
operating systems as well as most Apple MAC
versions 10.4.9 and later operating systems.
USB Cable Socket
Plug the USB cable (larger socket end) into a
USB port on your computer and plug the small
socket of the USB cable into the microscope
tube. Each computer system will have slightly
different messages. For example, on some
Windows operating systems, a message may read
“Installing Device Driver Software” and shortly
thereafter you may see a message “Your Devices
Are Ready to Use.” Follow the instructions shown
on the screen.
You will need to install ULead Photo Management
Software (on Windows operating systems) to
actually view and/or image. All imaging should
be done with the software program as the photo
button on the microscope is not usable. Prior
to installing the software, unplug the USB cable
until the installation is complete. You can also use
some different image/photo capture software that
you may have on your Windows operating system
(Amcap, etc.) if you desire.
1. Microscope Tube and Base 2. Microscope Base Arms 3. Terminals on the Back
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Celestron 44325 - Amoeba wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info