Bedienungsanleitung Celestron NexStar EVOLUTION (Seite 4 von 15) (Englisch)

667018

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

I 76 I

Assembly and Setup

Remove the parts from their shipping cartons and go over all

the items in the parts list. Keep all of the original packaging

so it can be used to transport the telescope safely.

Set the fork arm mount on a sturdy ﬂat surface. Remove all of

the accessories from their individual boxes.

Tripod for 6” and 8” Models

1. Spread the tripod legs and stand the tripod upright.

2. Remove the Tripod Support Nut and Washer from the

central column attached to the top of the tripod.

3. Place the accessory tray over the central column so that

each of the three arms of the tray is touching a tripod leg.

4. Thread the nut and washer back onto the threaded column

and ﬁrmly tighten into place. The accessory tray should not

be able to move against the tripod.

5. Adjust the height of the tripod by loosening the lock knobs

on the end of each tripod leg. Then adjust the leg height as

needed and retighten the lock knobs, one leg at a time. Note

the leg index marks can be used to easily level the tripod.

6. Conﬁrm the tripod is level using the built-in bubble level on

the tripod base.

Helpful Hint: When transporting the telescope, the tripod

can be folded with the accessory tray attached. Loosen the

Tripod Support Nut and Washer to allow the accessory tray

to drop, then rotate the accessory tray and fold the tripod

legs into the slots on the tray.

Mount

1. Place the fork arm mount on the tripod, carefully centering the

mount over the center post on the tripod head. Do not let go

of the mount until it has registered with the center post.

2. With the mount resting on the ﬂat top surface of the tripod

head, rotate the mount until the three mounting sockets

align. The sockets will click into place, indicating they are

aligned.

Note that the NexStar Evolution 9.25” model, which uses

the larger tripod, does not click into place.

3. Thread the three attached mounting bolts from underneath

the tripod head into the bottom of the telescope base.

Tighten all three bolts.

Prerequisites

• AC outlet to charge the telescope with the supplied AC

power adapter.

• An Apple iOS device with iOS 7.0 and later or an Android

device with Android 4.0 if used without the included Nex-

Star+ hand control.

• Free download of Celestron SkyPortal app from the App

Store or Google Play if used without the included NexStar+

hand control.

• Phillips head screwdriver to install the StarPointer red dot

ﬁnder.

Solar Warning

• Never look directly at the Sun with the naked eye or

with a telescope (unless you have the proper solar ﬁlter).

Permanent and irreversible eye damage may result.

• Never use your telescope to project an image of the Sun

onto any surface. Internal heat build-up can damage the

telescope and any accessories attached to it.

• Never use an eyepiece solar ﬁlter or a Herschel wedge.

Internal heat build-up inside the telescope can cause these

devices to crack or break, allowing unﬁltered sunlight to

pass through to the eye.

• Never leave the telescope unsupervised. Make sure an

adult who is familiar with the correct operating procedures

is with your telescope at all times, especially when children

are present.

Battery Caution

This product contains a long life lithium iron phosphate

battery “LiFePO4”. The battery includes numerous built-in

safety features including protection against overcharging and

overdischarging, and overheating. If reasonable care is used,

the battery should last thousands of charge cycles without

the need to replace it. To beneﬁt from the maximum battery

life, note the following recommendations:

• Charge the battery to full as soon as you receive the

telescope.

• Only use the included power supply to charge the

battery, or an FCC and CE certiﬁed 12VDC power

supply with at least 2 Amperes of current.

• Do not leave the battery fully discharged or low for

an extended period of time.

• Keep the battery charged every 3 to 6 months.

• Do not store the battery above 140ºF/60ºC.

Tripod Support Nut and Washer

Acessory Tray

Central Column

Leg Height Index Marks

Leg Height Adjustment Lock Knob

1 of 3

mounting bolds

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Celestron NexStar EVOLUTION Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info