Bedienungsanleitung Chacon 34948 (Seite 3 von 23) (Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

664853

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Synchronize Time (Important Setting)

The time shown on your mobile device must be synchronized with the time

shown on the Server prior to setup. Operation history will only be recorded once

synchronization is complete.

Edit Accessories

Rename, add, delete and change the Zone Mode of each Sensor. (except the 24

Hour Zone). Remember to tap the Save button in the top right hand corner to save

the changes.

Normal Zone : Sensors set to Normal Zone are armed whether the alarm is in

Arm (Full Arm) or Home Arm (Part Arm) Mode. We recommend setting Window/

Door Sensors to Normal Zone.

Home Zone

: Sensors set to Home Zone are only armed in Arm (Full Arm) Mode.

If Home Mode (Part Arm) is used, these Sensors are not armed and will not activate

the alarm on trigger. We recommend setting PIR Motion Sensors to Home Zone.

24 Hour Zone : Sensors set to 24 Hour zone will activate the alarm when

triggered, regardless of the alarm status at the time (armed or disarmed).

Note: Smoke, Gas Leakage or Water Flood Sensors are automatically registered as 24 Hour

Zone Sensors and cannot be changed to Normal or Home Zone. Any Motion or Door/ Window

Sensor paired to the Control Panel by pressing the Tamper Switch will also register as a 24 Hour

Zone Sensor. A 24 Hour Sensor will activate the alarm when triggered, regardless of the alarm

status at the time (armed or disarmed).”

Internal Siren

The volume level, alarm duration, and arm/disarm beep can be adjusted in the App.

Wireless Siren

When connecting an Outdoor Siren (optional accessory) to the Control Panel, it

can be enabled/ disabled by switching the Alarm option to on/off. The on/off arm/

disarm beep and alarm duration can also be adjusted.

Exit Delay Time

Set a time delay for you to leave your property without triggering an alarm.

Entry Delay Time

Set a time delay for you to enter your property without triggering an alarm.

Timed Arm/Disarm

The system can be programmed to automatically Arm and Disarm the alarm at

1. Set the time you want the alarm to arm (on the left)

2. Tap the Arm Button once to activate automatic arming and twice to disable it

3. Set the time you want the alarm to Disarm (on the right)

4. Tap the Disarm Button once to activate automatic disarming and twice to disable

the automatic disarming

5. Select the days you want the alarm to automatically arm/ disarm

6. Slide the switch to the ‘on’ position to activate the new schedule

Ringtone of Push Alert

The selected ringtone will be heard when a Push Alert is received.

History

page 13).

Passcode

We recommend that passcode protection is enabled to avoid unauthorized access

to the App.

Delete User

The alarm can be controlled by up to 5 Users who will also receive Push Alerts. To

delete a User Account from the App go to the submenu ‘More’ and select ’Delete

Users’

Normal Zone (Switchable to Home Zone or 24 Hour Zone)

Home Zone (Switchable to Normal Zone or 24 Hour Zone)

24 Hour Zone (Unchangeable)

functioning.

System Arm System armed by Remote Control

System Disarm System disarmed by Remote Control

System Home Arm System home armed by Remote Control

Arm by App System armed by App

Disarm by App System disarmed by App

Home Arm by App System home armed by App

Arm as Scheduled

System has auto-armed according to the ‘Timed Arm/

Disarm’ schedule

Disarm as Scheduled

System has auto-disarmed according to the ‘Timed Arm/

Disarm’ schedule

System SOS Alarm

Remote Control SOS button activation has triggered an

emergency alert

(Zone 1) Alarm A zone no. 1 sensor has been triggered

(Zone 1) Tamper

Alarm

Unauthorized attempt to remove the cover of a zone no. 1

sensor.

(Zone 1) Low Battery

A zone no. 1 sensor battery is low. Change the

battery as soon as possible.

Control panel AC failure Lost connection with AC Power

Control panel AC recovery Regain connection with AC Power

Installation

Control Panel

Wall Mounting

The Control Panel can be wall mounted using the Wall Bracket provided.

Using the screws supplied, mount the Wall Bracket onto the wall (ensuring that the arrow

on the bracket is pointing upwards), then match-up the Wall Bracket hooks to the holes

at the back of the Control Panel, and slide the Control Panel down onto the Wall Bracket.

②

①

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chacon 34948 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info