Bedienungsanleitung Chicco OhLaLa Twin (Seite 13 von 76) (Alle Sprachen)

767841

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ADJUSTING THE BACKREST

The inclination of the backrest is adjustable with a belt adjust-

ment mechanism.

9. To lower the backrest, use the rear adjustment system by

pressing the buttons of the tongs (g.9) and adjust the posi-

tion until you reach the desired inclination.

Vice versa, to raise the backrest, press the two lateral buttons

of the adjustment tongs and pull the belt until you reach the

desired position.

WARNING: The child’s weight can make these operations

more dicult.

REAR BRAKES

The rear wheels have linked brakes, which engage simultane-

ously by pressing on the central footboard.

10. To brake the stroller, press the central footboard down (g.

10).

11. To release the brakes, pull the central footboard up (g. 11).

SWIVEL WHEELS

12. To make the wheels swivel, lift the lever found between the

two wheels (Fig. 12).

Use the swivel wheels on smooth surfaces.

To lock the wheels, raise the lever (Fig. 12A).

WARNING: The swivel wheels make the stroller easier to han-

dle; in order to guarantee better stability, it is advisable to lock

the wheels in place on uneven ground (gravel, unpaved roads,

etc.)

WARNING: Both wheels must always be locked or unlocked

at the same time.

SUN CANOPY

To t the sun canopy:

13. Ensure that the metal arches are inserted in their respective

fabric holes as shown in gure 13.

14. Insert the metal arches in the relevant slots in the stroller

frame (Fig. 14) and secure them with their respective elastic

bands (Fig. 14A).

15. Secure the three plastic clips on the hood by sliding them

into their respective housings on the stroller frame (Fig. 15-

15A).

16. Fix the rear part of the hood to the backrest with the velcro

on the sides (Fig. 16) and with their respective snap but-

tons (Fig. 16A)

WARNING: The canopy must be xed to both seats of the

stroller.

Ensure both hoods are properly installed.

To remove the hood from the frame, carry out the procedure

above in the reverse order.

17. The hood on each seat can be adjusted independently. To

open the canopy, push the front arch forward (g. 17). For

more extensive protection, open the zipper on the hood

and open the remaining fabric section. (Fig. 17A)

To close it, repeat the operation in reverse order.

ADJUSTABLE LEGREST

The legrest can be adjusted to 2 positions.

18. To adjust it, press the buttons under the legrest (g. 18).

FOLDING THE STROLLER

The stroller has a closing device that can be used with one

hand.

WARNING: When opening the stroller, ensure that your child and

any other children are at a safe distance.

Make sure that during these operations the moving parts of

the stroller do not come into contact with your child.

19. Before closing it, ensure that the carry-all basket is emp-

ty, the hoods are closed and the backrests are completely

raised (Fig. 19).

20. To close the stroller, push cursor A to the left and at the

same time push button B (Fig. 1A). Keep pressing these

while bringing the handle forward to fold the structure

(Fig. 20), then nish closing it by turning the handle down

(Fig. 20A).

The stroller will automatically lock in the closed position. When

closed, the stroller stands on its own.

To carry the stroller like a trolley, it is possible to keep the han-

dle in the vertical position (Fig. 20B).

FITTING AND REMOVING THE STROLLER LINING

21. To remove the stroller lining, release the snap buttons

under the seat (Fig. 21), unfasten the velcro on the stroll-

er tube (Fig. 21A) and the fabric wings on the side of the

backrest from the relevant pins on the frame (Fig. 21B).

22. Pull o the fabric beginning from the legrest (Fig. 22), being

careful to disconnect the velcro under the seat (Fig. 22A),

and pull o the crotch strap belt and the waist straps from

the relevant holes (Fig. 22B – 22C).

Repeat the same operation for the other seat.

To t the lining on the stroller again, repeat the steps illustrated

above in reverse order.

CARRY-ALL BASKET

23. To disassemble the carry-all basket, release all of the but-

tons and velcro as shown in gure 23 – 23A.

ACCESSORIES

IMPORTANT NOTE: The accessories described below may

not be included in some product versions. Carefully read the

instructions for the accessories that came with the model you

have purchased.

SHOULDER STRAPS AND CROTCH STRAPS

The OHlalà Twin stroller may be tted with padded shoulder

straps and a soft crotch strap to ensure the safety and comfort

of your child.

24. For assembly, insert the shoulder straps (Fig. 24) and the

crotch strap in the relevant padding (Fig. 24A).

WARNING: Adjust the waist belt if necessary by pressing on

the buckles.

WARNING: To guarantee the safety of your child, the safety

harness must always be fastened.

RAIN COVER

25. To use the rain cover, wrap it around the hood and fasten

it with the three pieces of velcro, being careful to leave

the handle free (Fig. 25). Close the velcro strips around the

stroller tubes in the positions shown in gure 25A.

When you have nished using the rain cover, allow it to dry

properly if it is wet.

WARNING: The rain cover cannot be used on the stroller with-

out hood, as it may cause suocation.

WARNING: When the rain cover is tted on the stroller, never

leave it exposed to direct sunlight with your child inside, as the

temperature will rise considerably.

Chicco OhLaLa Twin Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info