Bedienungsanleitung Ciclo CM 628i Master (Seite 15 von 16) (Englisch)

588918

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Initialization runs only very slowly and is then

interrupted with 'Error'

•Transmitter battery empty or transmitter defective

•Transmitter is already initialised for other bike. If, in spite

of this, the transmitter should be initialised for this bike, a

total reset must be made (press AC button for 3 sec.), so

that the already existing initialisation is deleted.

Caution: With this, all settings and total values are also

deleted!

Automatic transmitter search does not start when

bike is in motion/moved.

• CM 628i is not seated (or is not seated correctly) on the

handlebar bracket

•A transmitter has already been received (SPD 0 in the

display), which can happen e.g., when a change is made

from one bike to another. As long as the CM 628i is still

located in the area of the first transmitter, the indication

0 remains in the display. Only when the CM 628i is

outside of the range of the first transmitter does the

indication ' - ' appear. With the next movement, the

transmitter search then starts automatically.

Individual values (e.g. distance or average speed)

still change at the end of the tour, although the

wheel is at a standstill and displays the speed 0.

• The CM 628i has a built-in correction function, so that

all values are checked again at the end of the tour (if no

further signal comes in – SPD 0) and corrected, where

appropriate. It can happen through this correction

function that, at the end of a tour, individual values

change once again – both Up and Down.

11. GUARANTEE

We offer a guarantee for 24 months from the date of

purchase on the CM 628i. The guarantee is limited to

material and processing faults. The batteries are excluded

from the guarantee.

The guarantee is valid only if the computer, with

accessories, has been handled and maintained carefully

and according to operating instructions.

To return the CM 628i under conditions/terms of the

guarantee, please refer to your dealer, your local distributor

or send the computer with the proof of purchase(date) and

all accessories, and with sufficient postage, to:

CICLO SPORT SERVICE

K. W. Hochschorner GmbH

Konrad-Zuse-Bogen 8

D-82152 Krailling

6362

Phone: 0049 180 /5 00 47 43 (EUR 0,12 min.)

Fax: 0049 89 / 714 07 83

E-Mail: ciclo-service@ciclosport.de

Please read through the operating manual again carefully

before sending in the device and check the battery.

In case of valid guarantee claims, the repaired device or a

replacement device will be returned free of charge.

Repair

If your CM 628i is sent in for repair (or battery change) or if

a guarantee claim is not valid, repairs up to EUR 19.- will be

carried out automatically.

In case of higher repair costs you will be notified.

The repaired device will be sent back COD.

12. TECHNICAL DATA

CM 628i

Operating temperature:

0°C to 50°C

Battery:

Lithium CR2032

Average battery life:

1 year (based on average use of 1 hour per day)

Transmitter belt

Reach:

Up to 10 m

Operating temperature:

0°C to 50°C

Battery:

Lithium CR2032

Average ba

ttery life:

1 year (based on average use of 1 hour per day)

Transmission frequency:

868 MHz

02 CM 628i engl 34-65 27.09.2005 8:40 Uhr Seite 30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo CM 628i Master Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo CM 628i Master

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info