604981
29
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
4028103 Rev A 29
Front Panel LED Status Indicator Functions
Normal Operations (AC Power applied)
The following chart illustrates the appearance of the cable modem front panel LED
status indicators during normal operations when AC power is applied to the cable
modem.
Front Panel LED Normal Operations
1 POWER
On
2 DS
On
3 US
On
4 ONLINE
On
5 Link
1
On - When a single device is connected to either the Ethernet or the USB
port and no data is being sent to or from the modem.
Blinks - When only one Ethernet or USB device is connected and data is
being transferred between the consumer premise equipment (CPE) and
the cable modem.
Off - When no devices are connected to either the Ethernet or the USB
ports.
Note: With both Ethernet and USB devices connected to the modem at the
same time, when data is transferred through only one of the devices
(Ethernet or USB), the LED illuminates continuously. Whenever data is sent
through both data ports (Ethernet and USB), the LED blinks as described
above.
1
The LINK LED is on whenever a PC is connected to the modem, and it blinks to indicate that
data is being transferred. If the modem provides telephone service only and is not connected to a
PC, the LINK LED is OFF.
Special Conditions
The following chart describes the appearance of the cable modem front panel LED
status indicators during special conditions to show when you have been denied
network access or when a software download is in progress.
Front Panel LED Status Indicators During Special Conditions
Front Panel LED Network Access Denied
Software Download
in Progress
1 POWER
Slow Blinking (Blinks 1 time per second)
On
2 DS
Slow Blinking (Blinks 1 time per second)
Blinking
3 US
Fast Blinking (Blinks 4 times per second)
Blinking
4 ONLINE
Slow Blinking (Blinks 1 time per second)
On
5 Link
Slow Blinking (Blinks 1 time per second)
On
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco DPQ2160 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info