Bedienungsanleitung Cisco ip phone 7931g (Seite 3 von 4) (Englisch)

301131

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Initiating an AdHoc

Conference Call

2 Dial another number.

When the call connects, press

Confrn

again to add this party to the conference.

Repeat those steps to have up to

sixteen total

parties on your conference call.

▪

Initiating a

Create a virtual meeting space that others can dial into to join you in conference.

Meet-Me

Conference

▪

Call Forward

Press the CFwdALL soft key; you'll hear two quick beeps.

To cancel the forwarding, press CFwdALL button.

▪

Tip: Verify Call forwarding is working by insuring the on your primary line in the status

window that the call forwarding icon is displayed --

Paging

No Paging -- no overhead paging or intercom.

Do Not Disturb

You can use Do Not Disturb (DND) to block incoming calls from ringing on your phone.

1 Press DND softkey

▪

Note: When DND and Call Forward All are both enabled, then calls are forwarded and the

caller does not hear a busy tone.

Informational Features:

Emergency 911

You can dial either 911 or 9911 -- either will work.

Last Number Redial

To View

Missed Call, Placed

Received Calls

2 Use the Up/Down Arrow key to select the number.

▪

Lift Handset, press Line Button, or press the NewCall soft key.

Press Redial Button on lower right of phone. The last number that you called will be dialed.

Tip: Press the

Exit

ExitExit

Exit

soft key twice if you want to exit the directory without making a call.

Note: Access the MeetMe conference by dialing the number given by the initiator. There is only one --

1050 . This is an internal number. It can only be setup and joined by dialing the MeetMe number inside

your network/offices.

Dial the number you want to forward your calls to. Don't forget to dial 9 if you want an

outside number. If you want to forward to voice mail, just press the Messages button.

Press the more soft key.

Press the Dial soft key to dial the selected number from list; or press the EditDial soft key

to edit the number first, and then press Dial.

Press the Directories button, and use the Up/Down Arrows Navigation key to select

Missed Calls, Placed Calls, Received Calls and press the Select soft key.

Tip: Total number of parties that can be connected on a MeetMe conference call is twenty five (25) .

Dial the meet-me meeting space number 1050 for this conference.

Press the MeetMe soft key.

Communicate the meet-me number you dialed to those you want to have join you in

conference.

Note: Once call is connected with another caller - you have a conference call in session. Now anyone can

add others to the conference call, and even when the conference Initiator hangs up, the other participants

can continue the conference. Also others can be added to the conference as long as you do not max out

the number of participants allowed.

While on a call, press the more soft key, then press the Confrn soft key. This will put the

first call on hold.

Quick Guide 1/2008

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cisco ip phone 7931g Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cisco ip phone 7931g

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info