622965
3
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
F900 User’s guide
Continued on the next page
Using alarm
The alarm on this watch always works based on the home time.
1.
Change the mode to [ALM] and pull the crown out to
position
2
.
The dual time indication indicates the current alarm time setting and the
second hand shows the current alarm setting (
ALM ON/OFF
).
The hour and minute hands may automatically move to provide a clear
view of the alarm time setting.
2.
Rotate the crown to set the alarm time.
If you rotate the crown quickly a few times, the hand will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
3.
Press and release the lower right button
A
to set the alarm
setting (ALM ON/OFF).
Each time you press button, the setting changes alternately.
4.
Change the mode to [TME] and push the crown in to position
0
to finish the procedure.
The second hand returns to indicate the seconds.
To stop alarm
Press any button.
Checking and adjusting leap second setting
The leap second setting can be adjusted by executing leap second reception.
You can find a list of leap seconds at the homepage of IERS
(INTERNATIONAL EARTH ROTATION & REFERENCE SYSTEMS
SERVICE).
http://hpiers.obspm.fr/eop-pc/earthor/utc/TAI-UTC_tab.html
1.
Change the mode to [SET] and pull the crown out to position
2
.
The second hand points to 0 second and stops.
2.
Press and hold upper right button
B
for 2 seconds or more.
Using the “0:00:00” position as the starting point, the minute and second
hands indicate the leap second setting.
When the leap second setting is
“−36 seconds”
When the leap second setting is
“−65 seconds”
The hands point to “0 minute
36 seconds.
The hands point to “1 minute
5 seconds.
3.
Turn the crown to adjust the setting if the leap second is not
correct.
Adjustable range is from 0 to ‒90 seconds.
4.
Change the mode to [TME] and push the crown in to position
0
to finish the procedure.
The second hand returns to indicate the seconds.
Indicating summer time
1.
Change the mode to [
TME
] or [
LLI
] and pull the crown out
to position
2
.
The function hand indicates summer time setting of the home time (
SMT
ON/OFF
).
When the mode is [UTC], you can only change summer time setting of
the home time.
2.
Press and release the lower right button
A
.
SMT ON
Summer time is indicated.
SMT OFF
The standard time is indicated.
Each time you press button
A
,
SMT ON
and
OFF
changes alternately.
3.
Press and release the upper right button
B
.
The function hand indicates summer time setting of the local time (
SMT
ON/OFF
).
Each time you press button
B
, the minute hand of setting target
slightly moves and the target (home time/local time) of time zone
setting changes alternately.
4.
Press and release the lower right button
A
to change
summer time setting of the local time.
5.
Push the crown in to position
0
to finish the procedure.
The second hand returns to indicate the seconds.
Using the chronograph
The watch can measure up to 23:59’59.95” by 1/20 seconds.
1.
Change the mode to [CHR] and push the crown in to position
0
.
0.00 second is indicated.
2.
Start measurement.
Start/stop: press button
B
.
1/20 chronograph seconds are indicated by the function hand only
when the chronograph is stopped.
Reset: press button
A
while the chronograph is stopped.
After measurement
Reset the chronograph and change the mode to [
TME
].
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Citizen Cal F900 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Citizen Cal F900

Citizen Cal F900 Bedienungsanleitung - Englisch - 116 seiten

Citizen Cal F900 Bedienungsanleitung - Holländisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info