Bedienungsanleitung Citizen Miyota OS25 (Seite 1 von 9) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

759617

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT

CALIBER NO. 0S25

CHRONOGRAPH FUNCTION : 1/20 SEC SMALL HAND CHRONOGRAPH

TIMING UP TO 59 minutes 59 seconds

BATTERY : SR927W

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

C) SETTING THE DATE

D) USING THE STOPWATCH

E) CHRONOGRAPH RESET ( INC. AFTER REPLACING BATTERY )

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

1. Pull the crown out to the 2nd Click Position so that the second hand stops at (0) position.

2. Turn the crown to set the hour and minute hands.

3. When the crown is pushed back to the normal position in synchronization with a time signal,

small second hand begins to run.

C) SETTING THE DATE

1. Pull the crown out to the 1st Click Position.

2. Turn the crown anticlockwise to set the date.

* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may

not change on the following day.

3. After the date has been set, push the crown back to the normal position.

D) USING THE CHRONOGRAPH

This chronograph is able to measure and display time in 1/20 second united up to maximum of 59min 59sec.

The retrograde chronograph 1/20(1/1) second hand keeps continuously for 30 seconds after starting,

and then stops at ZERO position.

Measuring time with the chronograph

Press button "B" to change the watch to the chronograph mode.

The second hand stops at the ZERO second position, and changes to the chronograph 1/20(1/1) second hand.

1. The chronograph can be started and stopped each time button "A" is pressed.

2. Pressing button "B" resets the chronograph and all hands return to their 0 positions.

"A"

RESET

TIME MEASUREMENT

STOP

"B"

"A"

"B"

E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)

This procedure should be performed when the chronograph second hand does not return to the "ZERO"

second position after the chronograph has been reset, and including after the battery has been replaced.

1. Pull the crown out to the 2nd Click Position.

2. Press button "A" to set the chronograph second hand to the 0 position.

3. Press button "B" to set the chronograph 1/20 second hand to ZERO position.

4. The chronograph hands can be advanced rapidly by continuously pressing button "A"

or "B".

5. Once the hands have been zeroed, reset the time and return the crown to its normal position.

* Do not return crown to normal position while chronograph second hand return to 12:00 (ZERO) position.

Hand stops on the way when crown are returned to normal position and these

positions are recognized as 12:00 (ZERO) position.

Chronograph

second hand

Hour hand

Chronograph

minute hand

second + 1/20 second

chronograph hand

minute hand

Normal crown

position

Button A

Calendar

24-hour hand

1st Click Position

2nd Click Position

Button　B

Normal crown position

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Citizen Miyota OS25 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info