Bedienungsanleitung Clarion CZ202E (Seite 6 von 16) (Englisch)

473633

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

English

CZ202E/CZ202ER/CZ202EG

5. OPERATIONS

Basic Operations

Note:

• Refer to the diagrams in “3. CONTROLS”

when reading this chapter.

CAUTION

When the unit is turned on, starting and

stopping the engine with its volume

raised to the maximum level may harm

your hearing.

Be careful about adjusting the volume.

Power on / off

Notes:

• Start the engine before using this unit.

• Be careful about using this unit for a long

time without running the engine. If you

drain the car’s battery too far, you may not

be able to start the engine and this can

reduce the service life of the battery.

1. Start the engine. The power button / knob

illumination on the unit will light up.

Engine ON

position

2. Press the [SRC /

] button on the front

panel to turn on the power under standby

mode. The unit goes back to the last

status after power on.

3. Press and hold the [SRC / ] button on

the front panel to turn off the power.

CT (Clock Time) display

• The displayed clock data is based on the

CT (clock time) data in the RDS signal.

Volume adjustment

Turn the [VOLUME] knob on the front panel.

The adjustable range of volume is 0 to 40.

CAUTION

While driving, keep the volume level at

which external sounds can still be heard.

Playing source selection

Press [SRC / ] button on the front panel

repeatedly to choose desired playing source.

Note:

• Playing source selection means selecting

which mode, such as DISC mode, RADIO

mode and AUX mode.

Display system time

Press the [DISP] button on the front panel to

switch the display information between RDS

information, system time and playing source.

RESET

If you have below problems, pls press

[RESET] button.

• Unitcannotpoweron

• Nothinghappenswhenbuttonsare

pressed

• Displayisnotaccurate

Note:

* When the [RESET] button is pressed,

preset radio stations, audio setting, etc.

stored in memory are kept.

RESET

In any mode, press and hold [DISP] button to

enter system setup. Press [

, ] buttons

to select options, rotate the [VOLUME] knob to

adjust.

AF: ON/OFF

Rotate the [VOLUME] knob to choose AF ON or

OFF.

REG: ON/OFF

Rotate the [VOLUME] knob to choose REG ON

or OFF.

DX/LO (RADIO mode)

Rotate the [VOLUME] knob to choose radio

local or distant at RADIO mode.

• LO: Only stations with strong signal can be

received.

• DX: Stations with strong and weak signals

can be received.

AUX SENS (AUX mode)

Rotate the [VOLUME] knob to choose AUX

Input sensitivity LOW, MID or HIGH at AUX

mode.

SCRN SVR: ON/OFF

Rotate the [VOLUME] knob to choose SCRN

SVR (screen saver) ON or OFF.

SCROLL: ON/OFF

For track information that is longer than the

display panel:

When SCROLL is ON, the LCD will display

ID3 TAG information cyclely, e.g: TRACK-

>FOLDER->FILE->ALBUM->TITLE->ARTIST-

>TRACK->...

When SCOLL is OFF, the LCD will scroll the

ID3 TAG information across the display, the

default is TRACK, but user can adjust it to other

ID3 TAG information by press [DISP] button.

System Setup

S-CTRL (IPOD mode) : ON/OFF

Rotate the [VOLUME] knob to choose S-CTRL

(Simple Control) ON or OFF.

* Refer to P9.

REAR/S-W

Rotate the [VOLUME] knob to choose REAR

or S-WOOFER (SUB-WOOFER).

TEL-SW

Rotate the [VOLUME] knob to choose

MUTE, ON or OFF.

• MUTE:

The sound from this unit is muted during

telephone calls.

• OFF:

This unit continues normal operation even

when the cellular phone is used.

• ON:

You can listen to your telephone calls from

the speakers connected to this unit.

*When listening to your calls on your car

speakers, you can adjust the volume by

turning the [VOLUME] knob.

BEEP: ON/OFF

Rotate the [VOLUME] knob to choose button

beep sound ON or OFF.

RESET:

1. Select ”RESET”.

2. Press and hold the [VOLUME] knob to

reset.

3. Settings will be set to the default value.

4. The unit will be turned off automatically.

Note:

• When the [RESET] is selected and you

press and hold the [VOLUME] knob,

radio station frequencies, titles, and

other data stored in memory are cleared.

Press the [ ] button to enter sound effect

setting mode. First press shows current EQ.

Rotate the [VOLUME] knob to change the BEAT

EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

Audio Setup

Rotate the [VOLUME] knob to change the

CUSTOM setting, and press the [VOLUME]

knob,

the press [

] or [ ] button to select

it including: BAS-G -> BAS-F -> BAS-Q

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ202E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ202E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info