473641
6
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
6
English


Start-up
5. OPERATION
After connecting your iPod to the EA1251, the iPod
display will change to the following:
To start iPod operations, change the main unit
mode to CD Changer mode. Playback will start
automatically.
The display changes from:
Disc Check g Disc Repeat g Start Playing
If the iPod is not connected, the main unit will
display “No Magazine”.
The main unit is unable to detect the presence of
iPod if the battery of the iPod is flat.
Please refer to the Playback section for detailed
operation information.
Playback
iPod buttons are disabled and the display is locked
after it is connected to EA1251. All operations of
the iPod are controlled from the main unit. Some
iPod operations and features will be unavailable.
Please read this manual carefully to optimise your
iPod operations.
To fully understand playback features, please refer
to PLAYLIST section.
By default, the playback setting will be:
Start to play from DISC1
(
All Songs Play
)
Shuffle
(
Random
)
Off
DISC Repeat On
When the iPod is connected, the main unit will
initially display “DISC” and “RPT”.
Song number display
Default playback setting
During playback, the main unit will display the song
number in sequence. However, only a maximum
of two digits are displayed. If there are more than
99 songs in your iPod, only the last two digits will
be displayed. For example, song number 102 and
1002 will both be displayed as “02”.
Play/Pause
Press Play/Pause button on the main unit to play/
pause iPod playback.
Disconnecting
iPod automatically switches “on” after connecting
to EA1251, and itʼs battery is charged as long as
it stays connected with the vehicle ignition key
turned to ACC or ON.
To switch off iPod manually, disconnect from
EA1251 adaptor.
If vehicle ignition is turned to ACC off, playback
is paused, and iPod will go to power off within a
few minutes.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clarion EA1251 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Clarion EA1251

Clarion EA1251 Bedienungsanleitung - Deutsch - 10 seiten

Clarion EA1251 Bedienungsanleitung - Holländisch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info