Owner’
UG-2176A
Surr
Thank you very much for your purchase of this Clarion pr
Before use, please r
After r
Clarion
All Rights Reserved. Copyrig
THE SURROUNDEYE INTERF
This equipment (SurroundEye Interface Box) performs conversion of the communication
data "between the camera ECU and PC" in order to set the Surr
•
to UVC standards for communication with a PC.
•
munication with a PC.
By installing the enclosed application CD in a PC, the camera ECU settings, software
version display, calibration function and fault diagnosis function can be operated with a
PC. Please see the application software PDF manual for details.
”SurroundEye Interface Box”is described as ”OVM Interface Box”in the manual of appli-
cation software.
SAFETY PRECAUTIONS
Make sure you adher
W
Do not touch the equipment in case of thunder
There is a risk of electric shock due to lightning.
CAUTION
When moving the equipment between environments with a lar
leave the equipment at the location for a few hours first before use.
W
Do not allow metals such as necklaces and hairpins etc. to contact the connectors.
This may result in fuming, fir
T
The electronic parts inside the equipment may get damaged due to static electricity generated during han-
dling, resulting in equipment failur
Do not expose the equipment to X-ray for a long period of time e.g. during equipment in-
spection, fault analysis etc.
This equipment is not designed to withstand long periods of radiation. The electronic parts inside the
equipment may get damaged due to long exposure to X-ray radiation, r
Do not use power supplies other than the USB bus power
This may result in fir
Do not disassemble, modify or repair the equipment.
Never disassemble, modify or repair the equipment under any cir
dents, fire and electric shock.
Do not use faulty equipment.
Unplug the USB cable immediately, switch off the power supply and make sur
in case of any fault. Use of faulty equipment may result in fir
Never repair the equipment on your own under any cir
Do not use the equipment when there is smoke, strange odors and when the equipment
gets unusually hot etc.
Unplug the USB cable immediately, switch off the power supply and make sur
in case of any fault. Use of faulty equipment may result in fir
Never repair the equipment on your own under any cir
Do pour water or place foreign objects inside the equipment.
Unplug the USB cable immediately, switch off the power supply and make sur
in the event water or foreign objects get into the equipment. Use of faulty equipment may r
and electric shock. Never repair the equipment on your own under any cir
Do not place any objects on top of the equipment.
Do not place flower vases, potted plants, cups, medicine, vessels containing water and small metallic ob-
jects such as setting pins and clips etc. on top of the equipment. This may result in fir
when they get inside the equipment.
Do not use the equipment in humid and dusty places.
Please do not use the equipment in humid and dusty places.
This may result in fir
Do not subject the equipment to strong impacts e.g. by dr
The equipment may get damaged, resulting in fir
Do not use the equipment in hot places.
Please do not use the equipment in hot places e.g. near a stove or fire etc.
The interior of the equipment may get hot, resulting in fir
Do not place the equipment in a location that is subject to a lot of vibration.
The parts may get detached due to vibration, resulting in faults.
Do not use combustible aerosols ar
Please do not use combustible aerosols (air sprays) ar
Sparks may result due to static electricity, r
PRECAUTIONS
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to pr
in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interfer
radio communications. However
a particular installation.
If this equipment does cause harmful interference to radio or television r
can be determined by turning the equipment off and on, the user is encouraged to con-
sult the dealer or an experienced radio/TV technician for help.
INFORMA
CHANGES OR MODIFICA
UF
SPECIFICA
Power Supply :
Current :
on USB power supply specifications)
External I/F :
Standard NTSC signal for image signal input use
(1 Vp-p / 75 Ω) 30fps
UART - 1 port
Serial communications use 115.2 kbps
USB 2.0 - 1 port
USB communications use USB 2.0 compliant
(B T
Image capture (output image)
Dimensions :
3-21/32”(w) x 1-3/16”(H) x 4-31/32”(D)
excluding protrusions (connectors / scr
Weight :
Operating Environment:
1 T 0°C - 60°C Use within the temperature range shown on the left.
2 Humidity 20% - 80 % Rh Use within the humidity range shown on the left.
30 mm
(1-3/16")
126 mm
(4-31/32")
93 mm
Declara
We Clarion declares tha
201
Authorized Rep
Clarion Europe S.A.S.
244 rue
TEL +33 3 83 4
P
This equipment comes with the following accessories.
Please contact your dealer if there is anything missing.
1
Owner’s manual ...................................................................................................... 1
2
USB Cable (1 m (3.28 ft)) ......................................................................................... 1
3
RCA Cable (3.6 m (11.81 ft)) .................................................................................... 1
4
Serial Cable (4 m (13.12 ft)) ...................................................................................... 1
5
Application CD ........................................................................................................ 1
6
SurroundEye Interface Box (Equipment) ................................................................... 1
Printed in Japan 2016/7 UG-2176A 280-9135-11
