Bedienungsanleitung Clatronic AR 737 (Seite 32 von 36) (Deutsch, Englisch)

551760

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Troubleshooting

Before going through the checklist please make all the

connections ﬁ rst. If you still have questions after going through

the checklist, please consult your local customer service

representative.

Fault Symptoms Cause Solution

CDs are drawn only

half way into the CD

tray.

The transport screws

have not been

removed.

Remove the transport

screws.

„NO DISC“ is shown in

the display.

The CD is inserted the

wrong way round.

Insert the CD right way

round.

CD cannot be selected

using the MOD(E)

button.

There is no CD

inserted.

Insert a CD.

A USB storage

medium is connected

to the USB port.

Remove the USB

storage medium.

The CD does not play

back after being inser-

ted into the device.

The volume control is

set too low.

Turn up the volume.

The device has

not been correctly

connected.

Check the +12V and

earth connection.

CD works intermittently

(dropouts).

The surface of the road

is uneven.

Wait until the road

becomes smoother

before playing the CD.

The device is not ﬁ rmly

installed.

Install the device ﬁ rmly.

Ensure that the rear at-

tachment is used if the

vehicle does not have

any suitable retainer

for the rear section of

the device.

The CD is damaged. Try another CD. If this

works correctly, the

ﬁ rst CD is probably

damaged.

The CD is dirty. Clean the CD.

The device may have

been installed in the

vehicle at the wrong

angle.

Please note that a

maximum inclination

of 20° degrees should

not be exceeded!

No function. The ignition is switched

off.

Turn the ignition key to

„ON“ or „ACC“.

One or more fuses

have blown.

Replace the fuse by

another 5 A /0,5 A/

0,5 A fuse.

Device cannot be

switched on or off via

the ignition.

Incorrect connection

(each car manufacturer

wires the ISO con-

nection in the vehicle

differently).

Please contact your

car workshop or a

vehicle specialist for

connection adapters

may speciﬁ cally for

your model.

The device does not

work correctly (EJECT,

LOAD, PLAY).

The microcomputer

has been interfered

with by electromagne-

tic ﬁ elds.

Remove the CD and

reinsert it.

Switch the device off

and on again.

Fault Symptoms Cause Solution

The device cannot be

operated, but „hangs

up“.

The control processor

of the device may

have been blocked by

overvoltage or under-

voltage in the vehicle

electrical system.

Press the RESET

button.

No radio reception. The antenna cable is

not connected.

Insert the antenna

cable ﬁ rmly into the

antenna socket of the

device.

Poor radio reception. It is possible that your

vehicle has a special

antenna (phantom-

powered antenna.)

Please contact your

car workshop or a

vehicle specialist. (For

other manufacturers

there are speciﬁ c

phantom power supply

adapters and voltage

adapters available.)

In automatic search

mode the radio does

not stop at a transmit-

ting station.

The transmission

signals are too weak.

Tune in to a radio

station manually.

Handling a CD

Cleaning the CD

Before playing a CD, wipe it off

with a clean, dust-free cleaning

cloth. Pull out the CD in the

direction of the arrow.

Note: Do not use any solvents such as petrol or thinning agents.

Commercially available cleaning substances or antistatic sprays

will damage the device.

Inserting the CD

If the CD is inserted with the

printed side facing downwards,

the device may be damaged.

Always insert the CD with the

label facing upwards.

Note: If there is already a CD in the CD slit, do not try to insert a

second CD. This may damage the device.

Touching the CD

Always hold CDs by the edge.

In order to keep the CD clean

do not touch the surface.

05-AR 737 DVD_GB 32 21.08.2006, 11:50:14 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic AR 737 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info