Bedienungsanleitung Clatronic cl 3227 (Seite 20 von 23) (Deutsch, Englisch, Italienisch)

133739

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

ENGLISH

current room temperature, the device switches the cooling

off and only the ventilator continues running.

ޥ NOTE:

The rate at which the desired temperature is reached depends

on the temperature of the room and the outside temperature.

Ventilator Speed

In the „cooling“ and „ventilator“ modes it is possible to set 3 dif-

ferent levels for the speed of the ventilator. The speed changes

with each press of the „

“ button (G/15):

Red – for a high speed

Green – for a medium speed

Orange – for a slow speed

Timer Functions

Switch-off Timer

1. Turn the device on with the „

“ button (J/13).

2. Brieﬂ y press the „ “ button (B/17) to change over to timer

adjustment. The digital display on the control panel ﬂ ashes

and shows 00. The „ “ control lamp lights up in green.

3. Press the button repeatedly to programme the timer. The

length of time is increased with every press of the button by

1 hour (00, 01, 02.....24, then from the beginning again).

4. After the set time has expired the device switches off.

Switch-on Timer

Before you use the switch-on timer turn the device on and set

the mode of operation, the ventilator speed and temperature.

The device displays the selected settings on the control panel

(Fig. 3).

1. Turn the device off with the „

“ button (J/13).

2. Brieﬂ y press the „

“ button (B/17) to change to the time

setting mode. The digital display on the control panel ﬂ ashes

and shows 00. The „ “ control lamp lights up in green.

3. In order to programme the timer, press the „ “ button (B/17)

repeatedly. The length of time increases by 1 hour with

every press of the button (00, 01, 02.....24, then from the

beginning again).

4. After the set time has expired, the device switches on.

If you would like to switch off the timer before the time has

expired, press the „ “ button (B/17) repeatedly until the digital

display shows 00. The timer is now switched off.

Sleep Mode

Please wait until the device has begun operation as described

under the section „Switching on/off“, or if the device is already

working, please proceed as follows:

• Press the „

“ button (C) to switch on the sleep mode.

• In sleep mode the ventilation speed is preset to low (orange

lamp).

• The speed can be set or changed by pressing the „ “

button (G/15).

• In sleep mode the previously selected temperature incre-

ases by 1°C after 1 hour and by a further 1°C after 2 hours.

• In order to switch sleep mode off again, press the „

“ button

once more.

Dehumidifying

When the device is operated in the „dehumidify“ mode you

should allow the exhaust air to ﬂ ow back into the room.

During dehumidiﬁ cation only the low ventilator speed is possible

(„

“ control lamp lights up in orange). In this mode of

operation it may be necessary to empty the condensation

container more frequently (see section on „Emptying the Water

Container“).

Air Outlet

• Press the „ “ button (J/13) to open the air outlet.

• Press the „

“ on (A/16) and the air outlet moves continuo-

usly up and down.

• The movement is stopped by repeatedly pressing the „ “

button and the air slit remains in this position. The direction

of the airﬂ ow is then constant.

• Once the „ “ button has been pressed the air outlet closes.

Emptying the Water Container

Under conditions of high humidity it may be necessary to empty

the internal condensation container. When the water container is

full, an acoustic signal is heard 15 times. The device switches off

automatically and the „

“ (K) control lamp lights up in red. In

order to empty the water container, please proceed as follows:

• Turn the device off („ “ control lamp lights up in red) and

remove the plug from the socket.

CAUTION:

Do not move the device, as otherwise this might

cause the water to leak out and damage the ﬂ oor,

carpet or device.

• Place the collecting pan supplied on the ﬂ oor under the

outlet (12) of the device (see Fig. 5).

Fig. 5

• Remove the rubber bung from the outﬂ ow and allow the

water to drain out (Fig. 6).

Fig. 6

05-CL 3227.indd 2005-CL 3227.indd 20 11.12.2007 10:09:09 Uhr11.12.2007 10:09:09 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic cl 3227 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info