551783
41
Zoom out
Zoom in
Vorherige Seite
1/65
Nächste Seite
Remove the power plug from the socket.
Release the pressure by using the steam switch (5).
If the device is still warm, please wait 5 minutes before removing the
seal completely. Press the seal downwards and turn.
Caution! Danger of Injury!
Please open the safety lock (4) only when no more steam comes
out of the nozzle.
Shake any residual water out of the kettle (2). Then
fill the measuring beaker (9) and pour the water into the kettle. Use a
funnel (8) if necessary. Re-fasten the safety lock (4).
Attachment of the Individual Accessories
It is possible to attach the individual nozzles directly to the connecting head of the
hose (3):
Attach one of the nozzles to the connecting head of the hose until it locks in
place.
In order to release the nozzle again please press the button on the connecting
head of the hose.
Keep the button pressed down and then pull the nozzle off.
or extend the nozzle attachments with one or two extension tubes (10).
Insert one extension tube into the other until it locks in place and then insert the
connected tubes into the handle section (3).
Then attach the floor brush nozzle (12) or the accessories.
In order to release the extension tube, please press the button on the connec-
ting head.
Jet nozzle with round
brush attachment (11):
For cleaning joints, the edges of bath tubs or areas
which are difficult to access etc.
Floor brush nozzle (12): For large surfaces, such as laminate or tiles etc.
Window wiper (13): For window cleaning, shower partitions etc.
Non-woven cover (14): Non-woven cover for sensitive surfaces. Please use the
cover together with the window wiper.
Switching on the Device
Before inserting the mains lead into the socket, check whether the voltage you
intend to use complies with that of the machine. For details see the machine
label.
Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
Turn the on/off switch (1) on top of the device to "I".
41
GB
5....-05-DR 2812 19.09.2003 11:32 Uhr Seite 41
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clatronic DR 2812 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info