Bedienungsanleitung Climadiff Clima 19 (Seite 16 von 20) (Englisch, Französisch)

653705

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

OPERATING INSTRUCTIONS

INSTALLATION INSTRUCTIONS

(optional

)

Other features

Auto-Restart

If the unit breaks off unexpectedly due to the

power cut,it will restart with the previous

function setting automatically when the powe

resumes..

Wait 3 minutes before resuming operation

After the unit has stopped, it cannot be restarted

operation in the first 3 minutes. This is to protect

the unit. Operation will automatically start after

3 minutes.

POWER MANAGEMENT feature

When the ambient temperature

lower than

the

setting temperature for

period

time, the

unit

will

automatically operate power managemen

feature. The compressor and fan motor

stop.

When the ambient temperature

higher than

the

Horizontal

window

Window Slider

Kit

Minimum:67.5cm(2.22ft).

Fig.5

INSTALLATION

INSTRUCTIONS

Location

The air

conditioner should

placed

on a firm

foundation

minimize noise

and

virbration.

For safe

and

secure positioning, place

the unit on a smooth,

level floor strong enough

support

the unit.

The unit has

casters

to aid

placement,

but it

should

only be

rolled

smooth,

flat

surfaces.

Use

caution

when

rolling

carpet surfaces.

Do not

attempt

to roll the unit

over

objects.

The unit

must

placed within reach

of a properly

rated grounded

socket.

Never place

any

obstacles around

the air inlet or

outlet

of the unit.

Allow

least 30cm

space from

the wall for

efficient

air-conditioning.

Adjust

manually

Adjust

setting temperature, the unit will

be automatically

quit the power management feature.

The

compressor and (or) fan motor

run.

Air flow direction adjustment

(Fig.4):

The louver can be set to the desired position

manually.

Do not place any heavy objects or other loads

on the louver, doing so will cause damage to

the unit.

Ensure the louver is fully opened under

Keep the louver fully opened during

operation.

Maxmum:123cm(4.04ft).

Horizontal

window

Window Slider

Kit

Minimum:67.5cm(2.22ft).

Maxmum:123cm(4.04ft).

Window Slider kit Installation

Your

window

slider kit has been

designed

to fit most

standard

Vertical

and

horizontal

window

applications,

However,

it may be

necessary

for you to

improvise/modify

some

aspects

of the installation

procedures

for

certain

types of

window. Please

refer

to Fig. 6& Fig.7 for

minimum

and

maximum

window

openings.Window

slider kit can be fixed with a bolt

(see Fig.7a).

Note:

If the

window opening

is less than the mentioned

minimum length

of the

window

slider kit, cut that one

never cut out the hole in

window

slider kit.

Fig.4

Horizontal

window

Window Slider

Kit

Maxmum:123cm(4.04ft).

bolt

Window slider kit

bolt

Window

slider kit

Fig.7a

Horizon

window

Window Slider

Kit

Minimum:67.5cm(2.22ft).

Maxmum:123cm(4.04ft).

Fig.7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Climadiff Clima 19 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info