657956
6
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
3 - Fill the thermocontroller and the mattress topper with water
a) Plug the thermocontroller into an electrical outlet
b) Open the water tank of the thermocontroller, and fill it with water. Use a glass,
bottle, or pourer.
c) Turn the thermocontroller on by pressing the
ON/OFF button on the thermocontroller board.
4 - Choose the sleep temperature
a) Take note if the temperature displayed is in Celsius or Fahrenheit.
To select one or the other, press the button labeled “°f/°con the thermocontrol-
ler board.
The thermocontroller's water pump will then start and fill the mattress topper with
water, which will take some water out of the thermocontroller's water tank.
The transparent gauge on the side of the thermocontroller helps you to see
when the tank is full.
Keep filling the water tank of the thermocontroller until it is full again and
remains so. Then close the water tank lid. One or two minutes should be suffi-
cient for the entire operation.
b) Press the “Up” and “Down” buttons on the thermocontroller board until you
reach the temperature you want.
Press THEN on the Enter button to validate your selected temperature. A
sound indicates that your choice is memorized.
The temperature of your CLIMSOM can vary from 18° to 48° Celsius (64° to 118°
Fahrenheit)
Use the lowest and highest temperatures only for limited times.
For instance, the cold will be relieving for heavy legs and the warm for muscle
stiffness.
Choose a more moderate temperature for all-night use.
Always choose a temperature that you feel comfortable with.
This temperature is different for each person, but 20° C (68° F) will be most often
felt as “too cold,” and 45° C (113° F) as “too hot” for longer periods of use.
What water to use: Common tap or well water is fine.
Do not use water with any additives.
Make sure that the pipe between the thermocontroller and the mattress
topper is connected before filling the thermocontroller tank with water
and turning it on.
Do not put water inside the thermocontroller elsewhere than its tank. If
needed, use a funnel. 
2
3
gauge
The thermocontroller board displays the current temperature of the water, which
will gradually change to the temperature you selected.
Water tank
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Climsom Topper wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Climsom Topper

Climsom Topper Bedienungsanleitung - Holländisch - 13 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info