Bedienungsanleitung Cobra BT200 (Seite 11 von 15) (Englisch)

538232

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Introduction

Nothing Comes Close to a Cobra

English

Introduction

Operating Your Handset

Customizing the BT 200

NOTE

If corrections are needed before saving the entry, press the Left or Right

Arrow Function button to move the cursor to the character that is to be

changed and press the Delete Function button to remove that character.

Then scroll the list to select the correct character.

NOTE

A “double click” on the Delete Function button will remove the entire entry

and return the cursor to the initial position after Name.

To Edit an Existing Name or Phone Number:

1. Select Phonebook from the Menu function, scroll down to

name or number to be edited and press the Edit Function

button to arrive at the screen shown.

2. Use the Right and Left Arrow Function buttons to move

the cursor to the character(s) to be changed and proceed

as described for making corrections when entering a new

name or number.

3. Press the Save Function button to save the changes or

deletion and go back to the Phonebook function.

PA Output

If, during installation, you have connected the Cobra Bluetooth handset connection

cable to your vessel’s stereo AUX input, you can allow the handset

to be used as a public address microphone.

To Enable Use of Auxiliary Speakers:

1. Select PA Output from the Menu function to arrive at

the screen shown.

2. Press the On or Off Function button to toggle between

On and Off condition.

NOTE

An optional installation cable is necessary to use the PA feature.

Phonebook Entries

The Operation section described using a Phonebook entry to dial an outgoing call.

Both names and numbers can be stored in the Phonebook.

To Enter a New Name and Phone Number

1. Select Phonebook from the Menu function and scroll

the pointer down to Add New at the bottom of the list

to arrive at the screen shown.

2. Press the Enter or New Function button to advance

to the Phonebook Edit mode.

3. Press the Up or Down Arrow button to scroll the

alphanumeric list to the first character of the Name.

NOTE

The list consists of the letters A to Z followed by the

numbers 0 to 9 followed by +, “space,” *, and # and

it will wrap around from # to A.

NOTE

If only a number (without a name) is to be entered,

at step 3, press the Right Arrow Function button until

the cursor moves to the first character of the number

and jump to step 7.

4. When the first character appears above the cursor, press

the Enter or PTT button to save the character and move

the blinking cursor to the right.

5. Repeat step 4 until the entire name has been entered.

6. Continually press or press and hold the Right Arrow

Function button until the cursor moves to the first

character of the Number.

7. Enter the phone number in the same fashion as the name.

8. Press the Save Function button to save the entry and go

back to the Phonebook function.

Operating Your Handset

Customizing the BT 200

NAME :

NMB:

SAVE

DEL

Enter a New Name

and Phone Number

1 555 588 2300

JANE DOE

ADD NEW

EXIT

EDIT

NEW

Add New

ON OFF

PA OFF

Enable Use of

Auxiliary Speakers

NAME : BILL ANDERSON

NUMBER: +1 555 566 1234

SAVE

DEL

Phonebook Edit

BT200_MANL.qxp:10732 Cobra MR F300 BT 12/8/08 1:44 PM Page 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra BT200 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info