Bedienungsanleitung Comar SLR-200-G (Seite 3 von 6) (Englisch)

521984

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Fault finding

No power light is displayed

● Check the power supply and that the unit is connected

correctly to a 12 or 24 volt DC supply

● Check the polarity of the supply is correct (red = +ve and

black is –ve).

Channel 1 and Channel 2 lights do not flash

● Check that a VHF antenna is fitted and correctly connected.

● Check that the antenna is correctly positioned – i.e. at a

suitable location to visibly ‘see’ vessels.

Hint: Until the deadlines for mandatory fitment are reached, ships may not

have fitted a Transponder, therefore if a ship is sailing past and no signal is

received there may be no fault with the SLR-200 receiver.

Channel 1 and Channel 2 lights flash but no data is received

If the red channel lights flash then data is being received from

nearby vessels.

● Check that the correct data cable is connected to the PC or

NMEA device.

● Check on the PC application or device that the correct port is

assigned and the correct baud rate is setup. The correct baud

rate is 38400.

I can receive ships on my display but no names are shown.

● Remember that the names of ships as well as other static

information is only sent every 6 minutes or when requested by

another station.

Product Support

Comar Systems Limited

Unit 7, Medina Court

Arctic Road

Cowes

Isle of Wight, PO31 7XD

United Kingdom

Telephone: +44 (0) 1983 282400 Fax: +44 (0)1983 280402

E-mail: techsupport@comarsystems.com

Internet: www.comarsystems.com

Introduction

Background to AIS

AIS is an Automatic Identification System. For improved safety and

specifically for collision avoidance reasons, vessels need to know the

position, details and navigational intentions of other vessels within

VHF range.

IMO regulations covering most commercial vessels worldwide, have

now been passed requiring that AIS transponders are fitted by

December 2004. The transponders use VHF frequencies to

● Transmit details of their own vessel and

● Receive details from other vessels or navigation aids within

VHF range.

The SLR-200

The SLR-200 is a low cost AIS (Automatic Identification System)

receive only unit, designed specifically for the Small Commercial,

Leisure, Fishing Boat and Vessel Monitoring Markets where vessels

are currently not mandated to transmit AIS information.

Connected to an on board PC running compatible software, or

Plotter, AIS data transmitted from ships within range can be

displayed on the screen giving the skipper or navigator a visual

interpretation of the traffic within VHF range.

Information from AIS transponders carried by most vessels or

navigation aids are transmitted at different rates as specified in

Tables 1 (see Page 10)

(Information source ITU Recommendations Technical Document ITU-R M.1371-1)

Information transmitted from vessels fitted with AIS transponders

includes:

● Name of vessel ● Call Sign ● Type of vessel

● Speed (SOG) ● Course (COG) ● Heading

● Position ● Navigational status ● Vessel dimensions

● MMSI number ● IMO number ● Draft

● Rate of turn ● Size of vessel ● Status

● Destination ● ETA ● Cargo

Note: Not all the above information is necessarily transmitted by each vessel.

www.Busse-Yachtshop.de email: info@busse-yachtshop.de

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Comar SLR-200-G Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info