521993
3
Zoom out
Zoom in
Vorherige Seite
1/110
Nächste Seite
ComNav Vector G2 & G2B Installation & Operation
Document PN 29010078 V2.0 - 1 -
DRAFT #3 – 29 May 2009
Welcome
Congratulations on your purchase of a ComNav Marine Vector G2 or Vector G2B GPS
Compass! At ComNav, we are dedicated to reliability & quality in all our products, and the
Vectors are a good example of that. We promise to do our best to ensure your satisfaction
with your new Vector GPS Compass.
ComNav Marine Ltd.
Warranty Notice
Prior to the installation and/or operation of the equipment, ensure that you read, understand,
and accept the conditions of the warranties as detailed in the
Warranty Information section of
this manual.
General Notice
This document, ComNav part number 29010078 Version 2 Revision 0, is the approved
Installation and Operation Manual for use with Vector G2 & G2B GPS Compasses. Where
versions of this manual exist in other languages, the English version shall be considered
authoritative.
Special Note
This manual applies primarily to the third generation of the Vector G2 & G2Bs.
A Vector’s generation can be determined by the initial 4 digits of its serial number, which are
a “date code” identifying the year and week it was manufactured. The serial number is on the
label on the underside of the enclosure.
This third generation’s date codes are 0902, or later.
The second generation began at date code 0722 and finished at 0850. For that generation,
please refer to any of revisions 1.4 through 1.6 of this manual, and Addendum #1.
It should be noted that much of the information in this manual can
be used with the later half
of the second generation (date codes 0802 through 0850) – as long as some care is used,
since a few features of the second generation differ from the third generation’s. For details,
see page 89.
The first ge
ne
ration had date codes of 0721 or earlier. For that generation, please refer to
revision 1.2 of this manual.
www.busse-yachtshop.de | info@busse-yachtshop.de
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ComNav Vector G2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info