521994
5
Zoom out
Zoom in
Vorherige Seite
1/110
Nächste Seite
ComNav Vector G2 & G2B Installation & Operation
Document PN 29010078 V2.0 - 3 -
DRAFT #3 – 29 May 2009
About this Manual
This manual provides essential information for the safe and reliable operation of the ComNav
Vector G2 GPS Compass. You are urged to read this manual in its entirety before you use
your GPS Compass for the first time, and to keep it handy until you become thoroughly
familiar with the operation of the compass.
Note: most of the information in this manual applies to both models of
the Vector G2 GPS Compasses: the Vector G2 and the Vector G2B.
For easier reading, most references in the text use “G2” – but that
should always be understood as referring to both models. Whenever
a particular item applies only to the G2 or the G2B, it will be so stated
in the text of that item.
When using this manual with the Vector G2, please ignore the
sections which discuss Radiobeacon signals, Beacon receiver
operation and related installation details. Those sections apply only
to the G2B.
Manual Format
This manual has been formatted to be printed on both sides of the pages of the manual, and
on standard Letter-sized paper (8.5” x 11”).
If you have obtained this manual as a soft-copy, please note that it is in Adobe® Portable
Document Format (“pdf”), and so may be viewed & printed with Adobe Reader®, or
compatible pdf-format viewers.
When printing this manual with Reader, you should select “duplex printing” (or the equivalent
term used by your printer’s software driver), in order to print it double-sided on the paper. If
your printer does not have built-in duplexing capability, you can still print this manual
double-sided by following the instructions that came with your printer for doing “hand
duplexing”.
You should also select the Auto-Rotate and Centre
option in the Print Dialog box, de-select
the Choose Paper Source by PDF page size
option; as well, you should set Page Scaling to
None – Reader’s default setting is Shrink to Printable Area, and is printer-dependant (usually
set at ~97%), but that is not needed here.
www.busse-yachtshop.de | info@busse-yachtshop.de
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ComNav Vector G2B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info