622831

Conrad Electronic safe 20 Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
Intended use
The safe can be used to store valuables. It has a stable steel casing and can be fi rmly attached
to a wall or placed on a stable surface.
It is operated with 4 batteries of type AA/Mignon The safe can also be opened with the keys
enclosed when the batteries are fl at.
Follow the safety instructions and all other information in this operation manual.
This product complies with the applicable National and European requirements. All names of
companies and products are the trademarks of the respective owner. All rights reserved.
Contents
• Safe
• Two keys
• 4 screws and 4 washers
• Operating Instructions
Explanation of the Symbols
This symbol indicates specifi c risks associated with handling, function and use.
☞
The “Hand” symbol indicates special tips and operating information.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for any consequen-
tial damage!
Nor do we assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void.
• The unauthorised conversion and/or modifi cation of the product is not allowed for
safety and approval reasons (CE).
• The product is approved only for mounting and operation in dry, closed rooms. No
part of the product must be allowed to get damp or wet.
• The product is not a toy and should be kept out of the reach of children!
• Do not leave packing materials unattended. They may become dangerous play-
things for children.
Battery Notes
• Batteries should be kept out of the reach of children.
• Do not leave batteries lying around in the open; there is a risk of them being swallowed by
children or domestic animals. If swallowed, consult a doctor immediately.
• Leaking or damaged batteries can lead to caustic burning of the skin. Therefore, use suitable
protective gloves.
• Batteries/rechargeable batteries must not be short-circuited, opened or thrown into a fi re.
There is a risk of explosion!
• Do not recharge normal, non-rechargeable batteries, risk of explosion!
• Do not mix batteries with different charges (e.g. fl at and half-discharged batteries).
☞
Due to safety reasons and operating duration, only high-quality alkaline batteries
should be used and not rechargeable batteries.
Installation
Select a place for installation where the safe is not immediately visible or easily accessible. This
may be behind a closet door or behind books, folders, or similar.
Installation in a partition wall (hollow wall) would also be ideal; a picture may be hung up in
front of the door.
☞
Protect the safe from dampness and humidity. Thus, do not install the safe in rooms
with high humidity or damp basements.
The safe can be mounted to a wall as well as on the fl oor, or another stable surface, using the
holes in the housing.
☞
If the safe is locked upon delivery, use the keys enclosed to open it.
The corresponding lock is hidden behind a small, thin plastic cover, which is situated
directly right to the closing handle.
Suitable screws and screw plugs may be necessary for installation depending on the surface.
Additional fi xation with special clue or similar is possible, if the surface is suitable.
Opening/closing the safe with the key
☞
This may be necessary when the batteries are half-fl at or fl at so that the safe cannot
be opened by entering the access code. The safe can be used in this way without
batteries, if desired.
• Remove the round, thin plastic cover from the lock; it is
situated directly to the right of the closing handle.
• Insert the key into the lock observing the correct orien-
tation and turn the key a little to the left in anti-clockwise
direction.
Hold the key in this position and turn the closing handle
to the right until it stops. Take the key out of the lock and
open the safe door.
• To close the safe, shut the safe door fi rst. Then, turn
the closing handle to the left until it stops; the lock is
engaged.
Check the lock; you should not be able to turn the closing handle to the right.
☞
If you accidentally turn the closing handle to the left when the safe door ist open
so that both lock bolts reach out of the safe door (the safe cannot be closed now),
simply proceed as described above.
Inserting/Replacing Batteries
• Open the safe using the keys as described above.
• Open the battery case at the back of the door; to do this, slide the cover backwards until it can
be removed.
• Insert four new „AA/mignon“ batteries with the correct polarity (observe +/Plus and -/Minus).
• Close the battery compartment again.
• Replacing the batteries is necessary, when the red LED light up when opening the safe or
the safe cannot be opened when entering the code. The access code is maintained when
replacing the batteries.
☞
If the safe does not respond to entries on the number pad, it can also be opened
using the keys enclosed. The corresponding lock is situated under a thin plastic
cover right to the closing handle, see image above.
Operation
Opening the safe by entering the code
• Enter the code and then press either the asterisk or the hash key. A beep will be heard every
time a key is pressed.
☞
The default setting for the code is “159”.
• When the code is correct, the green LED will light up and two beeps will be heard.
Turn the closing handle to the right until it stops within 5 seconds and open the door. If the
closing handle is not moved, the lock closes automatically after 5 seconds due to safety
reasons.
• If the code is incorrect, 3 beeps will be heard. After entering the wrong code three times, the
number pad is locked for 20 seconds. If a wrong code is entered three times once again, the
number pad is locked for 5 minutes.
• To close the safe, shut the safe door fi rst. Then, turn the closing handle to the left until it stops;
the lock is engaged.
Check the lock; you should not be able to turn the closing handle to the right.
☞
If you accidentally turn the closing handle to the left when the safe door ist open
so that both lock bolts reach out of the safe door (the safe cannot be closed now),
simply proceed as described above.
OPERATING INSTRUCTIONS www.conrad.com
Electronic safe 20
Item no. 75 50 04
Version 02/12
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Conrad Electronic safe 20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info