Intended use
The safe is used for storage of valuable objects. It features a durable steel sheet casing and
can be mounted either on the wall or on a stable surface.
It is battery operated using 4 batteries of type
key provided, even if the batteries are fl at.
Follow the safety instructions and all other information in this operation manual.
This product complies with the applicable national and European requirements.
companies and products are the trademarks of the respective owner
Package Contents
• Safe
• T
• 4 screws and 4 washers
• Operating
Explanation of the Symbols
fi c risks associated with handling, function and use.
☞
The “Hand“ symbol indicates special tips and operating information.
Safety Instructions
these safety instructions! We do not assume any liability for any consequen-
tial damage!
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void.
• fi cation of the product is not allowed for
safety and approval reasons (CE).
•
part of the product must be allowed to get damp or wet.
•
•
things for children.
Battery Notes
• Batteries should be kept out of the reach of children.
•
children or domestic animals. If swallowed, consult a doctor immediately
•
protective gloves.
• fi re.
There is a risk of explosion!
•
•
☞
line but not rechargeable batteries.
Installation
For the mounting location, it is advisable to choose a place where the safe cannot be directly
viewed or easily accessed. For example, this can be behind a closet door or behind rows of
books, folders or similar objects.
An ideal place can be also a partition (hollow) wall; the door may be hidden, e.g. behind a
picture.
☞
damp rooms or humid cellars.
Using the holes in the body frame of the safe, you can mount it on the wall or on the fl oor
another stable surface.
☞
immediately to the right of the closing handle.
Depending on the mounting surface, appropriate screws and, if necessary
used. If the mounting surface allows for it, additional fastening with e.g. special glue is also
possible.
Opening/closing the safe with the key
☞
fl at and the safe cannot be opened by
entering the access code. Moreover
if required.
•
situated directly to the right of the closing handle.
•
a bit to the left counter-clockwise.
the right up to the stop. Remove the key from the lock
and open the safe door
•
left up to the stop to make the lock latch.
☞
both lock bolts project out of the safe door (and the safe door won’t close), proceed
as described above when opening the safe.
Inserting / replacing batteries
• Open the safe using the keys as described above.
•
be removed.
•
• Close the battery compartment again.
•
or the safe cannot be opened by entering the code. The access code is retained during the
battery change.
☞
using the keys enclosed. The corresponding lock is situated under a thin plastic
cover right to the closing handle; see image above.
Operation
a) Opening the safe using an access code
•
sounds and the “PROCEED” LED lights up briefl y.
☞
“159A” or “159B” should be pressed.
• When the code is correct, the green “READY” LED will light up and two beeps will be heard.
locking grip is not moved, the lock will automatically latch after these 5 seconds for safety
reasons.
•
20 seconds and an alarm beep sounds during this time.
•
left up to the stop to make the lock latch.
☞
both lock bolts project out of the safe door (and the safe door won’t close), proceed
again as described above when opening the safe.
b) Setting a new access code
•
•
on the inside of the door), there is a hidden button; see
the circle on the fi gure on the right.
fl
lights up and 2 beeps will be heard.
• fl
the button “A” or “B” (example: 123456A). If two beeps
are heard, the new code is saved.
fl ashes and 3 beeps are
heard, the code is invalid (e.g. when a 2-digit code was
entered). Start over entering a new code; see above.
w.conrad.com
Electronic safe 20EA
V 07/12
