Bedienungsanleitung Conrad Electronic Safe 25 (Seite 3 von 8) (Deutsch, Englisch, Holländisch, Französisch)

622839

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Intended Use

The safe is used for storage of valuable objects. It features a durable steel sheet casing and

can be mounted either on the wall or on a stable surface.

It is battery operated using 4 batteries of type AA/Mignon. The safe can also be opened with the

key provided, even if the batteries are ﬂ at.

Follow the safety instructions and all other information in this operation manual.

This product complies with the applicable National and European requirements. All names of

Package Contents

• Safe

• Two keys

• 4 screws and 4 washers

• Operating Instructions

Explanation of the Symbols



This symbol indicates speciﬁ c risks associated with handling, function and use.

☞

The “Hand“ symbol indicates special tips and operating information.

Safety Instructions



The warranty will be void in the event of damage caused by failure to observe

these safety instructions! We do not assume any liability for any consequen-

tial damage!

Nor do we assume any liability for material and personal damage caused by

improper use or non-compliance with the safety instructions! In such cases,

the warranty will be null and void.

• The unauthorised conversion and/or modiﬁ cation of the product is not allowed for

safety and approval reasons (CE).

• The product is intended only for mounting and operation in dry, closed rooms. No

part of the product must be allowed to get damp or wet.

• The product is not a toy and should be kept out of the reach of children!

• Do not leave packing materials unattended. They may become dangerous play-

things for children.

Battery Notes

• Batteries should be kept out of the reach of children.

• Do not leave batteries lying around in the open; there is a risk of them being swallowed by

children or domestic animals. If swallowed, consult a doctor immediately.

• Leaking or damaged batteries can lead to caustic burning of the skin. Therefore, use suitable

protective gloves.

• Batteries/rechargeable batteries must not be short-circuited, opened or thrown into a ﬁ re.

There is a risk of explosion!

• Do not recharge normal, non-rechargeable batteries, risk of explosion!

• Do not mix batteries with different charges (ﬂ at and half-discharged batteries/rechargeable

batteries).

☞

For reasons of operational safety and longevity, you should only use premium alka-

line but not rechargeable batteries.

Installation

For the mounting spot, it is advisable to choose a place where the safe cannot be directly

viewed or easily accessed. For example, behind a closet door, rows of books, folders and so

forth.

An ideal place can be also a partition (hollow) wall; the door may be hidden, e.g. behind a

picture.

☞

Protect the safe against damp or moisture. Therefore, do not mount the safe in

damp rooms or humid cellars.

Using the holes in the body frame of the safe, you can mount it on the wall, on the ﬂ oor or other

steady surface.

☞

In order to open the safe for mounting, you can either put it into operation by 4 bat-

teries with entering the opening code (see below) or use the key provided.

The matching lock is hidden in the battery compartment, you just have to remove the

cover.

Depending on the mounting surface, appropriate screws and, if possible, dowels should be

used. If the mounting surface allows for it, additional fastening with e.g. special glue is also

possible.

Opening/closing the safe with the key

☞

This may be needed, if the batteries are low or ﬂ at and the safe cannot be opened by

entering the access code. Moreover, the safe can be operated without the batteries,

if required.

• Open the battery compartment by sliding its cover to

the right. If there are batteries inside, they should now

be removed.

• Insert the key in the lock in proper position and turn a bit

to the left anti-clockwise.

Keeping the key in this position, turn the locking grip to

the right up to the stop. Remove the key from the lock

and open the safe door.

• Before you close the safe, the safe door should be

closed. Then turn the locking grip to the left up to the

stop to make the lock latch.

Check the locking - turn of the grip to the right should not be possible now.

☞

If you inadvertently turn the locking grip with the open safe door to the left, so that

both lock bolts project out of the safe door (and the safe door won’t close), proceed

as described above when opening the safe.

Inserting / replacing batteries

• Open the battery compartment on the front part of the safe by sliding the cover of the battery

compartment to the right. There is a lock inside that enables opening the safe without the

batteries (see sbove).

• Insert two batteries of type AA/Mignon observing correct (+/plus and -/minus) polarity. After a

short autotest and some sound signals, „GOOD“ is displayed and the safe is ready for opera-

tion.

• Close the battery compartment again.

• The batteries have to be replaced, if “Lo-BAT” or no messages appear on the display after the

“START” button is pressed. The access code is retained at battery change.

☞

Alternatively, the safe can also be opened without inserting the batteries with the

key provided, see above. The matching lock is located in the battery compartment

(remove the batteries if present), see the ﬁ gure above.

Operation

Opening the safe using an access code

• Press the “START” button brieﬂ y, 6 dashes will appear on the LC-display (“- - - - - -”).

• Enter either the master code or the user code.

☞

At delivery, the code provided in basic settings is “123456”.

• If the code is correct, “OPEN” will appear on the display followed by a sound signal. A green

LED will light up near the locking grip on the left.

Within 5 seconds, turn the locking grip to the right up to the stop and open the door. If the

locking grip is not moved, the lock will latch for safety reasons automatically upon expiry of

these 5 seconds.

• If the code is wrong, “ERROR” will appear of the display. Besides, three warning signals will

be heard and a red LED will brieﬂ y light up near the locking grip on the left.

☞

After 5 incorrect code entries, the safe will generate loud alarm for app. 2 1/2 minutes.

In this period, no new codes can be entered.

• Before you close the safe, the safe door should be closed. Then turn the locking grip to the

left up to the stop to make the lock latch.

Check the locking - turn of the grip to the right should not be possible now.

☞

If you inadvertently turn the locking grip with the open safe door to the left, so that

both lock bolts project out of the safe door (and the safe door won’t close), proceed

as described above when opening the safe.



OPERATING INSTRUCTIONS www.conrad.com

Electronic Safe 25

Item no. 75 50 05

Version 02/13

Conrad Electronic Safe 25 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info