Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Model 139.53753
ICRRFTSMR. ISecurity'l'® 3-Function Remote C°ntr°l
Security+ ®Compact 3-Function Remote Control
Model 139.53752
USER INSTRUCTIONS
The Security.P remote control works only with 315 MHz
door openers and light controls having a purple "Learn"
button and yellow indicator light.
Programming instructions are described and illustrated
below. The additional push buttons can also activate other
315 MHz garage door openers and/or light controls.
(Instructions for programming light products are included
with those accessories.)
Remote Coding Instructions
\ IIIII
[] []
1. Press and release the "learn" button
on the motor unit. The learn indicator
light will glow steadily for 30 seconds.
2. Within 30 seconds, press and hold the
button on the hand-held remote.
3. Release the button when the motor unit
light blinks. It has learned the code. If \ __ /
light bulbs are not installed, two clicks will --_/_
be heard. /'_
To Erase All Codes From Motor Unit
Memory
To deactivate any unwanted remote, first
erase all codes.
Press and hold the "learn" button on motor
unit until the "learn" indicator light goes out (approximately
6 seconds). All previous codes are now erased.
Reprogram each remote or keyless entry you wish to use.
To preventpossibleSERIOUSINJURYor DEATHfrom a
moving gate or garage door:
NEVERpermit children to operate or play with door control
push buttons or remote control transmitters.
Activate gateor door ONLYwhen it can beseenclearly, is
properly adjusted, and there are no obstructions to gate or
door travel.
ALWAYSkeepgate or garage door in sight until completely
closed. NEVERpermit anyoneto cross path of moving gate or
garagedoor.
To Control the Motor Unit Lights (Premium
Consoles Only)
With Security,IP remote controls, a remote push button
can be programmed to operate the motor unit lights
without opening the door.
1.With the door closed, press and hold the remote button
that you want to control the light.
2. Press and hold the Light button on the door control.
3. Press and hold the Lock button on the door control.
4.After the motor unit lights flash, release all buttons.
Test by pressing the remote push button. The motor unit
lights should turn on or off but the door should not move.
The Remote Control Batteries
NEVERallow small children near batteries.
If battery is swallowed, immediatelynotify doctor.
The lithium battery should produce
power for up to 5 years. To replace 3-FUNCTBN
Open this end
firstto avoid
battery, use the visor clip or cracking_nnaggv_
screwdriver blade to pry open the ,ou
case as shown. Insert battery
matching polarity instructions
COMPAC'_
inside remote cover or on the Twisthere
printed circuit board, toopen
Dispose of old battery properly.
Replacement parts:
Security.IP 3-Function remote control
housing only (No circuit board) ............. 41A6140-1
Security.IP Compact 3-Function remote control
housing only (No circuit board) ............. 41A6139-1
3V2032 Lithium battery: ...................... 10A20
Visor clip: ................................ 29B134
114A3068B
NOTICE:Tocomplywtih FCCand or Industry Canada(IC) rules, adjustmentor modificationsof
this receiverand/or'_ansmitter areprohibtied,exceptforchangingthecodesethngor replacing
thebattery.THEREARENOOTHERUSERSERVICEABLEPARTS.
Testedto ComplywithFCCStandardsFORHOMEOROFFICEUSE.Operationissubjectto the
following two conditions:(1) this devicemaynotcauseharmfulinterference,and(2) this device
mustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation.
To order replacement parts call...
1-800-4-MY-HOME ® (1-800-469-4663)
© 2006, Sears, Roebuck and Co./® Registered Trademark / _" Trademark /
_" Service Mark of Sears, Roebuck and Co.
® Marca Regisb'ada / "Marca de F_brica / _' Marca de Servicio de Sears,
Roebuck and Co.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Model 139.53753

    ICRRFTSMR. I
    Security+

    Security'l'®
    ® Compact

    Model
    139.53752
    3-Function
    Remote
    C°ntr°l
    3-Function
    Remote Control

    USER INSTRUCTIONS
    The Security.P remote control works only with 315 MHz
    door openers and light controls having a purple "Learn"
    button and yellow indicator light.
    Programming instructions are described and illustrated
    below. The additional push buttons can also activate other
    315 MHz garage door openers and/or light controls.
    (Instructions for programming light products are included
    with those accessories.)
    Remote

    Coding

    To preventpossibleSERIOUSINJURYor DEATHfrom a
    moving gate or garage door:
    • NEVERpermit children to operate or play with door control
    push buttons or remote control transmitters.
    • Activate gate or door ONLYwhen it can be seen clearly, is
    properly adjusted, and there are no obstructions to gate or
    door travel.
    • ALWAYSkeep gate or garage door in sight until completely
    closed. NEVERpermit anyone to cross path of moving gate or
    garage door.

    Instructions

    To Control the Motor
    Consoles Only)

    \ IIIII
    []

    []

    Unit Lights

    (Premium

    With Security,IP remote controls, a remote push button
    can be programmed to operate the motor unit lights
    without opening the door.
    1. With the door closed, press and hold the remote button
    that you want to control the light.
    2. Press and hold the Light button on the door control.
    3. Press and hold the Lock button on the door control.

    1. Press and release the "learn" button
    on the motor unit. The learn indicator
    light will glow steadily for 30 seconds.

    4. After the motor unit lights flash, release all buttons.
    Test by pressing the remote push button. The motor unit
    lights should turn on or off but the door should not move.
    The

    2. Within 30 seconds, press and hold the
    button on the hand-held remote.
    3. Release the button when the motor unit
    light blinks. It has learned the code. If
    \ __ /
    light bulbs are not installed, two clicks will --_/_
    be heard.
    /'_
    To Erase

    All

    Codes

    From

    Motor

    Unit

    Remote

    Control

    Batteries

    NEVERallow small children near batteries.
    If battery is swallowed, immediatelynotify doctor.
    The lithium battery should produce
    power for up to 5 years. To replace

    3-FUNCTBN
    Open this end
    first to avoid

    To deactivate any unwanted remote, first
    erase
    all codes.
    Memory
    Press and hold the "learn" button on motor
    unit until the "learn" indicator light goes out (approximately
    6 seconds). All previous codes are now erased.
    Reprogram each remote or keyless entry you wish to use.

    Replacement parts:
    Security.IP 3-Function remote control
    housing only (No circuit board) .............
    41A6140-1
    Security.IP Compact 3-Function remote control
    housing only (No circuit board) .............
    41A6139-1
    3V2032 Lithium battery: ......................
    10A20
    Visor clip: ................................
    29B134

    battery,
    use blade
    the visor
    clip open
    or the
    screwdriver
    to pry
    case as shown. Insert battery
    matching polarity instructions
    inside remote cover or on the
    printed circuit board,

    Twist
    here
    toopen

    COMPAC'_

    Dispose of old battery properly.
    NOTICE:To complywtih FCCand or Industry Canada(IC) rules, adjustmentor modifications
    of
    this receiverand/or '_ansmitter areprohibtied,exceptfor changingthe codesethngor replacing
    the battery.THEREARENOOTHERUSERSERVICEABLE
    PARTS.
    Testedto Complywith FCCStandardsFORHOMEOROFFICEUSE.Operationissubjectto the
    following two conditions:(1) this devicemay not causeharmfulinterference,and(2) this device
    must acceptanyinterferencereceived,includinginterference
    that may causeundesiredoperation.

    To order replacement parts call...
    1-800-4-MY-HOME ® (1-800-469-4663)
    © 2006, Sears, Roebuck and Co./® Registered
    _" Service Mark of Sears, Roebuck and Co.
    ® Marca Regisb'ada / "Marca
    Roebuck and Co.

    114A3068B

    cracking_nnagg
    ,ouv_

    Trademark / _" Trademark /

    de F_brica / _' Marca de Servicio de Sears,



  • Page 2

    ICRRFTSHRN°I
    INSTRUCCIONES

    _
    Modelo
    139.53752
    Security+ ®Control Remoto Compacto de 3 funciones

    DEL USUARIO

    El control remoto Security+ ® s61ofunciona con los abridores 315
    MHz de puertas de garajes y controles de iluminacibn que tienen
    un boten de "Aprender" (Learn) morado y una luz indicadora
    amarillo.
    Las instruccienes de programacibn se describen e ilustran abajo.
    Los botones adicionales pueden activar tambien otros abridores
    315 MHz de puertas de garaje y/o controles de luz. (Se incluyen
    con esos accesorios instruccienes para programar productos
    de iluminacibn.)
    Instruccidnes

    _
    Modelo
    139.53753
    security.l_ Control Remoto de 3 funciones

    Cddigo

    del Remoto

    Paraevitarposibles
    LESIONES
    GRAVES
    o INCLUSO_ MUERTE
    con
    el movimientodelposen o lapue_ decochera:
    • NUNCApermitaquelos nifios haganfuncionaro jueguenconlos
    botonesde controlde la pue_ o e] posenni con lostransmisores
    decontrol remoto.
    • Ac_veel poseno la pue_ SOLOsipusdevedosclaramente,
    si
    estdnbienajus_dos,y si no hayningunaobstruccienensu
    trayectofia.
    • SIEMPREconservee] poKeno (apue_ de cochera
    a la vista has_
    que est6comp]e_mentecerrada.NUNCApermi_ que nadiecrucela
    trayectoriade unapue_ao poKenen movimiento.
    Control de las Luces
    Premium
    $61o)

    la Unidad

    del Motor

    (Consola

    Con los control remoto de Security., puede pr_ramarse
    un
    boten para operar Ins luces al unidad del motor sin abrir la
    pue_a.
    1. Con la pue_a cerrada, oprimir y mantener oprimido el boten
    remoto con el cual se desea controlar la luz.
    2. Oprimir y mantener oprimido el boten de luz en el control de
    la pue_a.

    1. Oprima y suelte el botbn "Aprender" de la
    unidad del motor. La luz indicadora de
    este boten estar& encendida por 30
    segundos.
    2. En los 30 segundos, oprima y mantenga
    oprimido el boten del control remoto
    manual.

    3. Oprimir y mantener oprimido el boten Lock en el control de la
    pue_a.
    4. Soltar todos los _tenes,
    motor centellean.

    Probar oprimiendo el boten remoto. Las luces del abridor deben
    encenderse o apagarse pero la pue_a no debe moverse.

    i

    LLT_
    La Batteria

    3. Suelte el botbn cuando Ins luces de la
    unidaddel motor empiecen a parpadear.Ya
    aprendi6 el cbdigo. Si no se ban puesto
    bombillos, se escuchar&n dos chasquidos.
    Pare Borrar Todos los C6digos
    Unidad dol Motor

    de la Memoria

    Para desactivar cualquier control remoto que
    no desee usar, antes que nada borre todos
    los c_igos.

    despu_s que Ins luces al unidad del

    I1_1

    de la

    I

    Oprima y mantenga oprimido el _tbn
    "Aprender" de la unidad del motor, hasta que
    la luz del indicador de "Aprender" se apague
    (aproximadamente 6 s_undos). Ya estaran borrados todos los
    _digos anteriores. Vuelva a programar cada uno de los
    controles remotos o la entrada sin Ilave que desee usar.

    del Control

    Remoto

    Paraevi_r la posibUidad
    de LESIONES
    GRAVES
    o INCLUSO
    MUERTE:
    • NUNCApermi_ que los nifios psqusfiosestencercade Ins batefias.
    • Si alguiensetragauna bateda,]lameal medicode inmedia_.
    La bater|a de litio debe producir
    energ(a durante cinco afios. Para
    cambiar la bater|a use el clip del visor
    o un destornillador para abrir la caja,
    como se indica en la ilustracien. Inse_e
    la bater(a de acuerdo con Ins
    instruccienes de _laridad indicadas en
    el cubie_o del control o en el tablero
    electrbnico.
    Deseche Ins _ter|as viejas de la
    manera adecuada.

    3-FUNCIONES
    _ra _e e_remo
    _remo _
    pnmero
    para
    ever que
    lacaJase
    ag_ete_

    Tuerza aqu(
    COMPACTO
    _ra abdr _

    Partes de repuesto:
    Security+ ®control remoto de 3 funciones
    caja y tornillo (no se incluye el tablero de cirouitos) . .41A6140-1
    Security.F®Control remoto compacto de 3 funciones
    caja y tornillo (no se incluye el tablero de cirouitos) . .41A6139-1
    3V_32 La bater|a de litio: .........................
    10A20
    El clip del visor: .................................
    Para pedir repuestos, Ilame al...
    1-800-4-MY-HOME
    ® (1-800-469-4663
    114A3068B

    [ AVISO:ParacurnplirconIns reglasde la FCCy/o de Canad_(IC), Ins reglas, ajusteso
    roodfficaciones deeste receptory/otransmisorestanprohibidos, excepto por el cambiode la
    graduaciendel cedigoo el reemplazode la pila. NO HAYOTRASPIEZASREPARABLES
    DEL
    USUARIO.
    Se
    ha probadoparacurnplirconInsnormasde
    la FCCparaeUSO
    DELHoGAn0
    DE LA OFICINA.La
    operacien
    est_sujetaa Insdoscondicionessiguientes:(1)
    ste dispositivo
    no puedecausar
    interferencia
    perjudicial,y (2) este dispositivodebeaceptarcualquierinterferencia
    recibida,
    nc uyendoa nterferenca que pueds causarunaoperac 6n no deseabe.

    29B134
    © 2006, Sears, Roebuck and Co./® Registered Trademark / " Trademark / "
    Se_ce Mark of Sears, Roebuck and Co.
    ® Marca R_iskada
    / _Marca de F_brica / _ Marca de Servicio de Bears,
    Roebuck and Co.






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Craftsman 139.53753 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Craftsman 139.53753 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,16 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info