●
Please check whether the local voltage of the AC outlet corresponds with the specifications
(see below).
●
Make sure to connect the machine only to a grounded outlet.
●
The sewing machine should never be left unattended when plugged in.
●
To unplug, always grasp the power plug, not the cord. Never unplug by pulling on cord.
●
Maximum permissible power of the sewing lamp is 15 watts.
●
Always switch off or unplug the machine from the AC outlet when doing the following:
Changing the needle, changing the presser foot, changing the bobbin, when interrupting
your work (when sewing machine is unattended), replacing the light bulb, cleaning and maintenance.
●
Children should not be allowed to use the machine. The machine should always be kept and
operated out of the reach of small children. Also, if the sewing machine is unplugged, there is still a
danger of injury.
●
The packaging material (plastic bags etc.) can be dangerous for children. Keep it away from children.
●
The cord must not touch any hot surfaces. If the cord is damaged, do not replace it yourself, but have
it replaced by specialists only. When operating the machine, the cord has to be completely uncoiled.
●
Make sure the sewing machine will not get wet - danger of electric shock!
●
Do not put anything on the foot controller, since the machine could thereby be started and the foot
controller or the motor could be damaged.
●
Do not use the machine outdoors.
●
Never operate the machine with any air openings blocked: Remove any dust, lint, thread scraps, etc.
Do not allow any objects to penetrate into the openings.
●
Only use the accessories mentioned by the manufacturer in this instruction manual.
Needles (twin needles) and light bulbs are available at specialized dealers.
●
When lubricating the machine, only use special sewing machine oils, because other oils are not suitable.
Do not insert any other fluid.
●
Keep fingers away from all moving parts of the machine.
Special care is required around the needle! Possibly use finger guard.
●
Always use the right presser foot. Using the wrong presser foot can cause the needle to break!
●
When sewing, make sure that your fingers will not get under the needle bar screw.
●
Do not use any crooked or blunt needles.
●
Do not stop or pull fabric while stitching. This could cause the needle to break.
●
When finishing your sewing work, always move the needle up to its highest position.
●
Do not operate the sewing machine, where aerosol (spray) products or similar substances are being
used or have been used.
●
Do not try to repair the sewing machine yourself as this will void the warranty. Also, after expiration of
the warranty period, the sewing machine may only be repaired by specialists.
●
The sewing machine has been developed for sewing fabrics under usual household conditions. The
sewing machine must not be used for other purposes.Commercial use will void the warranty.
●
Foot controller "EZ-168A" only to be used in connection with the sewing machine
MD 8708.
Important safety instructions
Please keep this manual for future reference, or to pass on to a new owner should the sewing
machine change ownership.
! Please read carefully before use !
Attention!
SPECIFICATIONS OF THE SEWING MACHINE:
Rated voltage 120V 60Hz - 0.4A rated power consumption 75 watts ( motor 60 watts
lamp 15 watts)
SPECIFICATIONS OF THE FOOT CONTROLLER:
Rated voltage 120V 60Hz protection class II UL Listed
2
