Bedienungsanleitung Crown XLi 1500 (Seite 2 von 12) (Englisch)

581054

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

XLi Series Power Ampliﬁers

page 2

Operation Manual

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding-type plug has two

blades and a third grounding prong. The wide blade or

the third prong is provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manu-

facturer.

12. Use only with a cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

15. Use the mains plug to disconnect the apparatus from the

mains.

16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE.

17. WARNING: THIS APPLIANCE SHALL BE CONNECTED TO A

MAINS SOCKET OUTLET WITH A PROTECTIVE EARTHING

CONNECTION.

18. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING

OR SPLASHING AND ENSURE THAT NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED

ON THE EQUIPMENT.

19. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL

REMAIN READILY OPERABLE.

TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP

OR BOTTOM COVERS. NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

TO COMPLETELY DISCONNECT THIS EQUIPMENT

FROM THE AC MAINS, DISCONNECT THE POWER

SUPPLY CORD PLUG FROM THE AC RECEPTACLE. THE

MAINS PLUG OF THE POWER SUPPLY CORD SHALL

REMAIN READILY OPERABLE.

WARNING: PAY ATTENTION TO A PROCEDURE, PRACTICE, CONDI-

TION OR THE LIKE, IF NOT CORRECTLY PERFORMED OR ADHERED

TO, COULD RESULT IN PERSONAL INJURY OR DEATH.

CAUTION: PAY ATTENTION TO PROCEDURE, PRACTICE,

CONDITION OR THE LIKE, IF NOT CORRECTLY PERFORMED OR

ADHERED TO, COULD RESULT IN DAMAGE OR DESTRUCTION TO

PART OR ALL OF THE COMPONENT.

WATCH FOR THESE SYMBOLS:

The lightning bolt triangle is used to alert the user to

the risk of electric shock.

The exclamation point triangle is used to alert the user

to important operating or maintenance instructions.

IMPORTANT

XLi Series ampliﬁers require Class 2 output wiring.

MAGNETIC FIELD

CAUTION! Do not locate sensitive high-gain equipment such as

preampliﬁers or tape decks directly above or below the unit. Be-

cause this ampliﬁer has a high power density, it has a strong mag-

netic ﬁeld which can induce hum into unshielded devices that are

located nearby. The ﬁeld is strongest just above and below the unit.

If an equipment rack is used, we recommend locating the

ampliﬁer(s) in the bottom of the rack and the preampliﬁer or

other sensitive equipment at the top.

FCC COMPLIANCE NOTICE

This device complies with part 15 of the FCC rules. Operation is sub-

ject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

CAUTION: Changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to ra-

dio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Important Safety Instructions

Crown XLi 1500 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info