Bedienungsanleitung Ctek MXT 14000 AE (Seite 5 von 8) (Englisch)

648531

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

EN • 5

• The charger’s analysis function has interrupted charging.

• The terminals on the charger are short-circuited after charging has started.

• The charger has been in start mode for more than 4 hours.

SPECIFICATION

Model 1015

Voltage AC 220–240VAC, 50–60Hz

Charging voltage 28.8V

Charging current 14A max

Current, mains 2.9A rms (at full charging current)

Back Current Drain* <2Ah per month

Ripple** <4%

Ambient temperature -20°C to +50°C Output power is automatically reduced at higher temperatures

Cooling Fan

Charger type 8-step, fully automatic

Battery types All types of 24V lead-acid batteries (WET, MF, AGM and GEL)

Battery capacity 28–300Ah, up to 500Ah maintenance

Degree of protection IP44 (Outdoor use)***

Weight 3.5 kg

Battery cable 6m with Anderson Powerpole connector

Extension cable 60cm with battery clips,

50cm with 12mm DC plug. (DIN EN ISO 4165),

50cm with 19mm cig plug connector****

Fuse 20A

*) Back current drain is the current that the charger drains from the battery if the AC cord is disconnected.

**) The quality of the charging voltage and charging current are very important. High current ripple heats the battery and

ages the positive electrode. High voltage ripple can damage other equipment connected to batteries. The battery chargers

from CTEK produce very high quality voltage and current with low ripple.

***) IP44 cannot be guaranteed if the charger is not positioned horizontally with the long side or topside turned up.

****) When using the 19mm cig plug connector the mating part must be approved for 14A or more.

MAINTENANCE

The charger is maintenance-free. The charger must not be opened; doing so will invalidate the warranty. If the power cable

is damaged it must be replaced by CTEK or its authorized representative. The charger casing can be cleaned using a

damp cloth and mild cleaning agent. Remove the plug from the power socket before cleaning.

LIMITED WARRANTY

CTEK SWEDEN AB, Rostugnsvägen 3, SE-776 70 VIKMANSHYTTAN, SWEDEN issues this limited warranty to the

original purchaser of this product. This limited warranty is not transferable. CTEK SWEDEN AB warrants this unit for 2

years from the date of purchase against defect workmanship or material. It is the obligation of the purchaser to forward

the unit together with proof of purchase to the manufacturer or its representative with transportation cost prepaid. This

warranty is void if the unit is abused, handled carelessly or repaired by anyone other than CTEK SWEDEN AB or its

authorized representative. CTEK SWEDEN AB makes no warranty other than this limited warranty and expressly excludes

any implied warranty including any warranty for consequential damages. This is the only expressed limited warranty and

CTEK SWEDEN AB neither assumes nor authorizes anyone to assume or make any other obligation towards the product

other than this limited warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ctek MXT 14000 AE Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ctek MXT 14000 AE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info