723544
25
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
How to set up
1. In the customized rice taste function, press the “warm/reheat” button. Then ‘the customized
warming mode
will be entered. Now, press the “Timer” button. The display will be shown
as below.
2. When entering the customized sleep warming, press the “Hr/SOAK” button.
display will be fixed and press the customized rice taste function to set up.
3. After entering the customized sleep warming, press the “Cancel” button or do not press any
button for 7 seconds if you desire to cancel the order.
4. Set it up to your taste since it is set off manufactured.
1. In the customized rice taste function, press the “warm/reheat” button. Then the customized
warming mode
will be entered. Now, press the “Timer” button. The display will be shown as
below.
2. When entering the customized sleep warming, press the “Min/HEAT” button.
display will blink and then press the customized rice taste function if you want to cancel.
3. After entering the customized sleep warming, press the “Cancel” button or do not press any
button for 7 seconds if you desire to cancel the order.
If you need to keep the rice warm while you are sleeping, do not use this function. This function
makes the rice cooler than normal. In summer, the rice can go bad and smells because of high
temperature if possible do not use the customized sleep warming.
When opening the lid, if a lot of water drips from the lid bottom, or if the rice is too soft, try this.
1. When opening the lid, if too much water drips : Press “Hr/SOAK” button to raise the setting mode about 1~2 step.
2. If the edge of rice is too soft : Press button “Min/Heat” to reduce the setting mode about 1~2 step.
-2 Press “Min/HEAT” button to change the
display as
Select the menu you want, then the press the
“My Mode” button and set-up time will be
automatically entered with a buzzer sound.
(If you do not press a button within 7
seconds, the function will go back to the
previous function.)
-1 Press “Hr/SOAK” button to change the
display as
Press “warm/reheat” button in my
mode. (Refer to page 15) The display of
mark will be changed with a buzzer
sound.
is the initial signal.
How to apply the warm temperature at my mode.
How to keep warm during sleep
When keeping the rice warm for a long time, set up the temperature low to prevent the following quality of
rice: smell, dry, change of color; from PM10:00 ~ AM 04:00.
How to release
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cuckoo CRP-L10 Fuzzy Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info