Bedienungsanleitung Cuisinart BFP 703 CE (Seite 7 von 33) (Englisch)

72231

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

CLEANING AND MAINTENANCE

Always unplug your Cuisinart

SmartPower Duet

Blender/Food

Processor from the electrical outlet before cleaning. The blender is

made of corrosion-resistant parts that are easy to clean. Before first use

and after every use, clean each part thoroughly. Periodically check all

parts before reassembly. If any part is damaged or blender jar is

chipped or cracked, DO NOT USE BLENDER.

Remove the blender jar from the motor base by lifting straight up and

away. Twist off the locking ring by turning counterclockwise. Remove

the cutting assembly and rubber gasket. Wash in warm soapy water;

rinse and dry thoroughly. Place the locking ring in the upper rack of the

dishwasher or wash in warm water.

CAUTION: Handle the cutting assembly carefully. It is SHARP and may

cause injury. Do not attempt to remove blades from cutting assembly.

Remove the blender jar cover and the measured pour lid. Wash in warm,

soapy water; rinse and dry thoroughly, or place in the upper rack of the

dishwasher. The blender jar should be washed in warm soapy water and

rinsed and dried thoroughly. The blender jar can also be placed upside

down in the dishwasher.

Finally, wipe the motor base clean with a damp cloth to remove any

residue, and dry thoroughly. Never submerge the motor base in water or

other liquid, or place in the dishwasher.

Tip: You may wish to clean your blender cutting assembly as follows:

Squirt a small amount of dishwashing liquid into assembled blender jar

and fill halfway with warm water. Run on Stir for 15 seconds. Repeat

using clean tap water. Empty blender jar and carefully disassemble

parts. Wash cutting assembly, gasket and locking ring in warm, soapy

water. Rinse and dry all parts thoroughly.

QUICK REFERENCE GUIDE

FOR BLENDER FUNCTION

To activate blender Press On- The blender is in On mode.

To begin blending Press desired speed button.

To change speeds Press desired speed button.

To pulse In On mode press Pulse, then press and

release desired speed button as needed.

To crush ice In On mode, press and release Ice Crush

button as needed.

To stop blending and deactivate blender Press Off button.

To stop blending in Pulse or Ice Crush mode Release button.

To stop blending in Stir, Chop, Mix, Purée, Press speed button again. This will return

or Food Processor mode the blender to On mode. Press Off button

to turn blender off.

SPEED SELECTION GUIDE

FOR BLENDER FUNCTION

Refer to this guide to choose the best speed for your desired result.

Ingredient/Recipe Speed Result

Reconstituting frozen orange

juice concentrate Stir Smooth and full-bodied

Mayonnaise Stir Thick and creamy

Salad dressings Stir Desired consistency

Nuts Chop Coarse to fine

Whipping cream Mix Thick topping

Bread crumbs Mix Uniformly fine

Grating citrus zest Purée Uniformly fine

Milk shakes Purée Smooth and creamy

Baby food Purée Smooth and creamy

Health drinks Food Processor Smooth and creamy

Frozen cocktails Food Processor Thick and slushy

Grinding hard cheese Food Processor Coarse to fine

Spices Food Processor Coarse to fine

Ice Ice Crush Snowy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cuisinart BFP 703 CE Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info