PR
4
mi
watts
data
hub
Id
45847
hub
Id
LEArn
1
27
5) Press [SELECT] to toggle through auto start options.
mi, and data = allows trip time to count when wheel speed is regis-
tering. Trip time stops 3sec. after if speed is not registered.
( ), and data = allows trip time to count as long as a heart rate sig-
nal is
registered. This function is useful in the transition from
cycling to running and vice versa.
Press [MODE] to save.
COMPUTER SETUP 5
This setup allows the CPU to learn a new device or sensor such as the hub, heart rate strap and
optional cadence sensor. NOTE: This process only needs to be used if a new sensor or hub is
being used in conjunction with your CPU or vice versa and if batteries are changed in the hub or
chest strap. There are 2 Learn sequences, 1 and 2. Learn 1 is used when you have switched sen-
sors or the CPU and there are no other like bikes with PowerTap SL2.4 within a 30’ radius. Learn 2
is used if there are other devices in the area but requires you to remove and reinsert the battery
before activating the Learn 2 sequence.
1) To manually change the hub I.D. Push [Select] to toggle through the
Hub I.D. Press [Mode] to save.
2) In most ca
ses the Hub I.D. will not be known so you can "learn" the I.D. by
pressing [Mode] to advance through the Hub I.D. settings to Learn 1. NOTE:
Learn 1 will search for any active hub so be sure that there are no other
active hubs in the area. If there are, proceed to Lear
n 2.
