Bedienungsanleitung Daewoo DF-4150P (Seite 37 von 64) (Englisch)

561887

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

DVD Playback

Press [DVD] to set the remote control to operate the DVD deck.

Turn the TV on and select the video input source connected to the DVD Recorder+VCR.

Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.

2 Press [OPEN/CLOSE] to open the disc tray.

3 Load your disc in the tray with the playback side down (label side up).

4 Press [OPEN/CLOSE] to close the tray.

’READING’ appears on the front panel display, and playback starts automatically. If playback does not start,

press [PLAY (

√

)]. In some cases, the Disc menu might appear instead.

Playing a DVD+R (+RW)

When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel

displays on the screen.

If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu.

Select a title to play then press [ENTER].

Playing a DVD

If a Disc menu is displayed

• A Disc menu may be displayed when you load a DVD. Use the [

œ √…†

] buttons to select the title/chapter you

want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.

• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must

be entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 29.

• The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region

code for this DVD Recorder+VCR is 2 (two).

• Unless stated otherwise, all operations described below use the remote control. Some features may also be

available in the Setup menu.

• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.

• A disc which is recorded with unauthorized movie material may not be played.

• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.

Still Picture and Frame-by-Frame Playback

Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Still mode.

You can back up or advance the picture frame-by-frame by pressing [FF (√√ )] repeatedly during Still mode.

Fast Forward/Backward

Press [REW (œœ )] or [FF (√√ )] during playback. The DVD Recorder+VCR will go into Search mode.

Press [REW] or [FF] to select the desired speed: √√ X2, √√ X4, √√ X8, √√ X16, √√ X32,

√

(forward) or

, œœ X2, œœ X4, œœ X8, œœ X16, œœ X32 (backward).

• Slow reverse playback is not supported.

Slow Motion

Press [SLOW+] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] repeatedly, the

speed will be set to 1/4, 1/8, and normal speed.

DF-L71D1P-UA/TA 04.11.24 11:51 PM 페이지36

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Daewoo DF-4150P Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info