486411
2
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
1
1.Microwave is a kind of high frequency electromagnetic wave, which is commonly distributed in the nature.
But the existing form of microwave is dispersed so that it cannot be collected together for heating purpose.
The key component of magnetron of microwave oven will transform the energy of electricity to microwave
and huge energy of microwave field is established under the closed cavity. So the molecule of food is
caused to vibrate at very high speed and the friction heat produced will cook the food in a fast way.
2. There is 3 properties of microwave, that is
a) Absorbability, the microwave can cause the excess vibration of molecule of various food so as to obtain
the heating purpose. But the infiltration ability is largely depend on the size, thickness and properties of the
food.
b) Penetrability, microwave can penetrate through ceramics, glass, temperature-resistant plastics. It is
required to use the containers whose material have good microwave penetrability to achieve best heating
result. See the below utensils guide.
c) Reflectivity, microwave would be reflected by the metal wall of interior cavity so as to establish an even
magnetic field, thus can prevent the overheating of partial area.
Installation of microwave oven
1) To ensure sufficient ventilation, the distance of the back of microwave to the wall should be at least
10 cm, the side to the wall should be at least 5cm, the free distance above the top surface at least 20
cm.
2) Do not place any objects on the top of microwave oven.
3) Do not place any objects on the top of microwave oven.
4) The position of the oven shall be such that it is far from the TV, Radio or antenna as picture
disturbance or noise may occur.
5) The appliance must be positioned so that the plug is accessible.
6) The microwave oven is intended to be used freestanding and shall not be placed in a cabinet.
7) To keep the microwave oven at a distance from the wall, it is necessary to install a distance limiter.
Push Distance Limiter
in this direction
Alternative 2
1)Push Distance Limiter in the given direction;
2)Make sure Clasp A is secured to Hole A;
Secure Clasp A to Hole A
Hole A
Clasp A
Hole A
Distance Limiter
3)Insert Clasp B and Clasp C into their respective square holes.
Clasp C
Clasp B
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Daewoo KOR-6006 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info