561883
7
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
12
11
EXHAUST FILTER:
Remove the plug from the wall socket. (Never pull on the cable, always apply light pressure
to the plug housing)
Remove the exhaust air filter cover by pressing the interlock release button.
Take out the exhaust air filter and rinse it well under cold, clean water before leaving to dry.
Never clean the exhaust air filter using soap or any other cleaning fluid. This would
destroy the filter!
Reposition the exhaust air filter.
If the exhaust air filter is heavily soiled, it is to be recommended that the filter be replaced
with a new one.
Replace the exhaust air filter cover.
Cleaning the RCC-231 cyclone vacuum cleaner.
As and when necessary, the RCC-231 cyclone vacuum cleaner may be wiped clean using
a damp cloth and a little mild cleaning fluid. Never use abrasive cleaning fluids as these
could damage the appliance surface.
Ensure the notfluid is allowed to seep inside the RCC-231 cyclone vacuum cleaner. Never
place parts in the dishwasher.
Only connect your RCC-231 cyclone vacuum cleaner to the mains power supply once all
pars are completely dry.
From time to time it may also necessary to remove hair and fluff from the wheels in order to
ensure that the RCC-231 cyclone vacuum cleaner remains comfortable to use.
Never oil or lubricate roller bearing in the RCC-231 cyclone vacuum cleaner.
FAULT FINDING:
When using a highly technical device do not assume that every irregularity is defect.
Always consult the table first, in order to assess whether you are able to solve the problem
yourself. 1f this does not prove possible, please contact our Customer Service by
telephone.
Problem Possible causes Solution / Tip
Suction power is weak
The secondary air valve
is open.
Close the secondary air
valve.
The vacuum hose is
blocked
Check all of the adapter
parts, valves, vacuum
hose tube etc and
remove the blockage.
The filters are not fitted
correctly or they are
soiled.
Check the filters and
replace them with new
filters where necessary.
The divece does not
switch on
The plug is not correctly
connected to the wall
socket.
Check whether the wall
socket fuse is intact. It
could be that the wall
socket itself is defective.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Daewoo RCC-231 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info