Bedienungsanleitung Dali IKON MK2 (Seite 6 von 38) (Englisch)

562740

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

1.0 INTRODUCTION

Congratulations with your new DALI IKON MK2 loudspeaker. It is important to us that your new

DALI loudspeakers are set up and connected optimally. For this reason, we recommend that

you read this manual and follow its instructions (This manual only refers to the new IKON MK2

series). The manual contains instructions for setup and connection, as well as tips and advice

on how to get the most out of your new loudspeakers. DALI is acclaimed around the world for

unique loudspeakers built to our uncompromising standards for design and performance. The

goal for every single DALI loudspeaker is always our foremost commitment: To create a listening

experience in your home that will make you forget time and place.

Remember to sign up for the DALI newsletter at www.dali-speakers.com.

Enjoy!

2.0 UNPACKING

Be careful not to damage the contents when you unpack the parts. Depending on which DALI IKON

model you have bought, different accessories come with the loudspeaker. Check that all parts are

contained in the cardboard box (see Table 1). Keep the packaging materials should your speaker

need to be relocated or serviced.

2.1 GRILLES

The speakers are delivered with the grille fronts already mounted when you unpack them. If you

wish to remove the grille front, loosen it by gradually tugging at the metal plungers that hold it

in place. It is important that all metal plunges are equally loosened before removing the front.

Otherwise the grille may be damaged.

3.0 POSITIONING

To achieve the best results, the loudspeaker setup should be symmetrical round your favorite

listening position (except for IKON SUB), (see Figure 1A – 1C). We recommend that you

experiment with the position of your loudspeakers – the sound quality will change depending

on the loudspeaker position. For IKON 1, 2, ON-WALL and VOKAL 2, the speakers should ideally

be positioned, so that the tweeter is approximately at ear height when seated in your favorite

listening position. IKON 5, 6, 7 and SUB are designed as ﬂoor standing speakers. They should be

positioned minimum 20 cm (8”) from the rear wall.

IKON 1 has been optimised for positioning close to the wall. IKON ON-WALL is designed exclusively

for wall-mounting. IKON VOKAL 2 is designed to be positioned ﬂat against the wall, and IKON 2 has

been optimised for stand mounting. Objects positioned between the speaker and listening position

might negatively affect sound quality. All IKON speakers are designed to meet our wide dispersion

principle, so they should not be angled towards the listening position, but be positioned parallel

with the rear wall (see Figure 2). By parallel positioning, the distortion in the main listening area

will be lowered and the room integration will be better. The wide dispersion principle also ensures

that sound is spread evenly within a large area in the listening room.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali IKON MK2 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dali IKON MK2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info