Bedienungsanleitung Dali PHANTOM E Series (Seite 7 von 37) (Deutsch, Englisch, Dänisch, Französisch)

745219

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Objects positioned between the speaker and listening position might negatively affect the sound

quality. The PHANTOM E series are designed to meet our wide dispersion sound principle. By

using speakers with wide dispersion technology, the distortion in the main listening area will be

lowered and the room integration will be better. The wide dispersion principle will also ensure that

sound is spread evenly within a large area in the listening room.

Every room has its own distinctive acoustics, which inﬂuence the way we experience sound from a

speaker. The sound you hear consists of both direct sound from the speakers and reﬂected sound

from the ﬂoor, ceiling and walls. The latter will affect how you experience the sound. As a basic

rule, try to avoid large, hard and reﬂective areas in the immediate vicinity of your loudspeakers as

it will typically cause strong reﬂections, which might disturb the precision and spatial effect of the

sound reproduction. Soft items such as carpets, curtains etc. might help if the sound is too bright.

Both the amount and quality of the deep bass depend on the size and shape of the room, and the

position of the speakers. Positioning the speakers near a side or back wall will accentuate the

bass. A corner location will accentuate it even more, but will also increase the reﬂections.

4.1 Mounting the dogleg brackets

DALI PHANTOM E series incorporates dogleg brackets for ceiling/wall mounting. The brackets

attach the loudspeaker ﬁrmly to the rear of the surface on which it is mounted. The dogleg

brackets extend out at a 90-degree angle when the screws are tightened (see ﬁgure 4). The

screws should be tightened so that the loudspeaker sits securely in place – but be careful not to

over tighten the screws. To tighten the screws, use a 3 mm Allen bit. The Allen bit should be used

with a hand bit screwdriver or a drilling machine with build-in torque setting. If using a drilling

machine, set the torque to the minimum setting. The screws are appropriately tightened, when

the gasket on the rear of the speaker is compressed and the bezel of the speaker is ﬂush with

the mounting surface.

If you need to remove the loudspeaker, loosen the screws approximately 5 to 20 turns counter

clockwise and the brackets will loosen their grip. NOTE: do not unscrew more than 20 to 25 turns

or the brackets may fall off the screws.

If you are mounting the loudspeaker in very thick wall material, it might be needed to dismount the

dogleg brackets from the screws and afterwards mounting them upside down. Opposite mounting

of the doglegs will make it possible to mount the loudspeaker in boards with up to 2,55”/65 mm

thickness (see ﬁgure 5).

4.2 Grille

The front grille is ﬁxed in place by the magnets incorporated into the front bafﬂe of the DALI

PHANTOM E series.

NOTE: There is an optional square grille available for order.

NOTE: On the inside of the grille there is a piece of non-woven. The non-woven is on the grille

to protect the drivers against dust and dirt. Therefore the non-woven must remain on the grille.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali PHANTOM E Series Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info