745210
12
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
14
Display (see Figure 6)
On the front of the subwoofer there is a translucent logo badge/display. The settings of the
subwoofer can be seen on the display when the subwoofer is operated by the remote control
or the buttons on the amplifier.
5.8 FACTORY RESET
To reset all memory settings to factory default, press the ‘+’ and ‘-’ buttons on the back of the
SUB P-10 DSS simultaneously for 10 seconds. This will set the values to:
VOLUME: 25
PHASE: 0
CROSSOVER: 120
SOUND MODE: CINEMA
6.0 RUNNING-IN
You should expect the sound quality from your new subwoofer to gradually improve during the
initial period of use. Nothing particular has to be done in order to run in the subwoofer – but
expect up to 100 hours of playback (depending on playback level) before full performance level
is reached. Use normal music for running-in the subwoofer.
7.0 OVERLOADING
If DALI SUB P-10 DSS is overloaded, the built-in safety circuit will power down the subwoofer.
The subwoofer will power on again when the temperature of the built-in amplifier is within safe
working range. If overloaded, we recommend that you turn off the subwoofer for a few minutes
before turning it on again.
NOTE: The built-in safety circuit is no guarantee against damage as a result of overloading.
8.0 MAINTENANCE
Cleaning the subwoofer surfaces can be done with ordinary household cleaning agents and
using a micro fibre cloth. Avoid using products that are abrasive or contains acid, alkali or
antibacterial agents. Avoid using aerosols. Avoid using cleaning agents directly on the drive
units and clean them with extreme care.
8.1 AVOID DIRECT SUNLIGHT
The surfaces of the subwoofer may fade or become discoloured over time when exposed to
direct sunlight. Therefore avoid positioning the subwoofer in direct sunlight.
9.0 DISPOSAL
DALI products are designed to meet the international directives concerning Restriction of
Hazardous Substances (RoHS) and disposal of Waste Electrical and Electronic Equipment
(WEEE). The waste symbol indicates that the subwoofer meet the directives. The subwoofer
must be processed or recycled appropriately. Please consult your local waste authority for
guidance.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dali SUB P-10 DSS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info